Examples of 'thermostat must' in a sentence
Meaning of "thermostat must"
thermostat must - This phrase implies that there is a requirement or necessity for a thermostat to perform a certain action or function. It suggests that there is an expectation or command for the thermostat to do something specific, such as adjust the temperature or control the heating or cooling system
How to use "thermostat must" in a sentence
Basic
Advanced
thermostat must
The thermostat must be installed on an inside wall.
The setting of the thermostat must be.
The thermostat must be installed by a qualified electrician.
The mains cable with thermostat must never become wet.
The thermostat must be disposed of as electronic waste.
Only the appropriate mains cable with thermostat must be used.
Thermostat must be mounted on an electrical box.
Water pump and thermostat must be replaced.
Thermostat must be done by a qualified electrician.
Installing the maestro thermostat installation of the thermostat must be done by a qualified electrician.
The thermostat must never be covered by a curtain or similar.
The receiver of the wireless room thermostat must be installed behind the radiation heater.
The thermostat must be installed in right end of the heater.
When I was working on the fridge their thermostat must have gone.
The thermostat must be set properly.
See also
Otherwise, a master thermostat with a relay or a slave thermostat must be used.
A thermostat must be installed to control the temperature of the area to be heated.
After doing this the thermostat must be re-programmed.
The thermostat must be in heating mode to carry out the test heating indicator ON.
In this case, the thermostat must be replaced.
The thermostat must be fully installed in order for the buttons and LCD to operate.
More importantly, the thermostat must not be removed.
The room thermostat must be without current when manoeuvring the actuator by hand.
Therefore, the user interface used as room thermostat must be installed on a location.
The room thermostat must not be combined with other thermostats in the same control zone.
To assure proper operation of fan, thermostat must not cycle fan on and off.
Each thermostat must be connected to the Danfoss LinkTM CC.
Before operating the icemaker, the bin control thermostat must be installed correctly.
The heater and thermostat must be properly installed before they are used.
To activate or deactivate this mode, the thermostat must first be set in Day mode.
The thermostat must be switched to a position between 2.
The set temperature on the thermostat must be higher than the current room temperature.
Thermostat must be linked to a Wi-Fi network see page 18.
The connected room thermostat must be operated in the HEAT menu.
Thermostat must be connected as shown on wiring diagram ( Fig . 12 ) for correct operation.
To do this, the thermostat must be removed first.
Thermostat must be connected as shown on wiring diagram ( Figure 13, page 7 ) for correct operation.
Oil, oil filter, spark plugs and thermostat must be changed before starting the engine.
The thermostat must be set much higher ( or lower ) than the desired house temperature.
The room thermostat must have voltage-free contacts.
The pilot duty thermostat must be used with a contactor and ( if required ) a transformer.
ATTENTION: A thermostat must always be connected to zone 1.
You'll also be interested in:
Examples of using Thermostat
Show more
Check that the thermostat functions correctly
Thermostat control knob shown in off position
He turns the thermostat all the way up
Examples of using Must
Show more
They must have changed their view
Someone you know must have died
He must have loved you very much
