Examples of 'thickness and width' in a sentence
Meaning of "thickness and width"
thickness and width - This phrase refers to the measurements of an object in terms of its depth and breadth. It is often used in discussions about physical dimensions and sizes
How to use "thickness and width" in a sentence
Basic
Advanced
thickness and width
Thickness and width are ignored.
The portions are illustrated to provide examples of varying thickness and width.
The thickness and width can be freely adjusted from.
The band is dimensioned in the desired manner in terms of thickness and width.
The thickness and width of the dough must remain even.
One layer of fibrous web can be used if provided in a suitable thickness and width.
The thickness and width of the strip are not particularly limited.
The raving knife thickness must be in between sawblade body thickness and width of cut.
The thickness and width of the deposit were measured using these images.
The pulses of the laser can control the thickness and width of the layer.
The thickness and width of the strip depends on the thrust to be contained.
A rolling mill line produces continuous sheets of steel in the required thickness and width.
The increase in thickness and width was due to the thickness of the applied coating.
Typically this may involve processing into a sheet of predetermined thickness and width using a calendar.
Check the thickness and width of incoming material before production can be carried out.
See also
First, a board is prepared to have a predetermined thickness and width.
Additional guides maintain thickness and width as the setting slurry travels on a moving belt.
Said strip of ledes 2 can have any thickness and width.
The thickness and width of the strip enabled the cut to be sealed after soldering.
The apparatus is designed to produce a two-dimensional fabric of constant thickness and width.
The thickness and width of each strip 2 are approximately constant.
On the other hand, they have a thickness and width that are not well controlled.
The thickness and width are also approximately identical for all said strips 2.
Surface can be supplied in a mirror or matte finish ; dependent upon thickness and width parameters.
Clearly, the thickness and width of a sheet material may be varied.
This strip 26 has a substantially uniform cross section having a predetermined thickness and width.
Setting initial die thickness and width to the final dimensions of the profile ;.
An exemplary crimped material is illustrated in Figure 11 with the thickness and width labelled.
A minimum thickness and width of the natural dental substance is required to achieve good strength ;.
For convenience, the chosen conventions for thickness and width are shown on Figure 3B.
The wall thickness and width of the flexible arms 305 can be uniform or non-uniform.
An exemplary crimped material is illustrated in Figure 3A with the thickness and width labelled.
Determining the final product thickness and width from the thickness and width factors ; and.
The entire upper vertically aligned section 30 is of uniform thickness and width.
The initial thickness and width values are then set at 70.
It has been processed into pieces of not more than 2,5 cm thickness and width.
Before the test . the thickness and width were measured to an accuracy of 0.1 mm.
For example, a door 's type properties could include its thickness and width.
The thickness and width of the ring segment 20 in Figure 5 ( e ) are uniform or nonuniform.
The constraints are the effective conductivity, and the thickness and width of the channel 11.
The wood has been processed into pieces of not more than 2,5 cm thickness and width.
Restrictive parameters are the electric conductivity, and the thickness and width of the channel 11.
Applied for wood waste and scrap, not agglomerated, of more than 2,5 cm thickness and width.
The 7085 control alloy was hot rolled to the same thickness and width as Plate 1.
You'll also be interested in:
Examples of using Width
Show more
Set the width to suit your personal
Apply a border and select a border width
Overall width depends on the seat width
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
