Examples of 'thickness does' in a sentence
Meaning of "thickness does"
Thickness does: Likely a truncated phrase without full context. It could refer to the thickness measurement or characteristics of a substance or material
How to use "thickness does" in a sentence
Basic
Advanced
thickness does
The thickness does flatten out while being used.
In jacketing applications, such thickness does not usually exceed one millimeter.
Its thickness does not exceed a few tenths of a micron.
It also recommended that the final thickness does not exceed 10 mm.
Board thickness does not match depth of cut scale.
Better results are obtained when this thickness does not exceed 100 microns.
Board thickness does not match depth scale indicator.
The TENAA is indeed referring to measurements of thickness does not exceed 6.9 mm.
Wall thickness does not affect pipe or tubing size.
For this reason, it is preferred to use layers whose thickness does not exceed 5000 Å.
One thickness does the job of two.
However, reducing layer thickness does not always stop whisker formation.
Thickness does affect the number of lamellar domain pairs.
More preferably, the overall thickness does not exceed three times the gauge of the material.
Thickness does not taper over time, it remains constant.
See also
It is shown that layer thickness does not influence the fracture spacing under bending.
This thickness does not, however, offer sufficient protection against the heat generated by an engine.
Increasing the gel layer thickness does overcome this problem but sensitivity is reduced.
Its thickness does not necessarily correspond to its size.
However, membrane thickness does alter the permeability value.
Now this thickness does not offer great rigidity to the device.
The wall thickness does not necessarily need to be the same everywhere.
But preferably the thickness does not vary substantially over the length of a layer.
The added thickness does require deeper-pocket sheets, and generally lasts from two to five years.
Typically its thickness does not exceed 2 nm and it is at most 5 nm.
Typically, the coating thickness does not exceed 50 microns and more typically does not exceed 30 microns.
You'll also be interested in:
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
Examples of using Does
Show more
So does that giant hole in the wall there
Not because of what he does in his bedroom at night
She does not want to open her door
