Examples of 'threaded' in a sentence
Meaning of "threaded"
Thread is a verb that means the act of passing a long, thin strand of cotton, nylon, or other fibers through and out of the other side of something, such as a needle, hole, or fabric
Show more definitions
- Having threads.
- (Of messages) Arranged in a thread.
- simple past tense and past participle of thread
How to use "threaded" in a sentence
Basic
Advanced
threaded
The clutch assembly is threaded on the crankshaft.
Threaded valve neck for fitting actuator.
Make certain it is threaded correctly before tightening.
Threaded bushings in the bottom of the feet.
Adapters for threaded shank milling cutters.
Threaded connections must only be tightened by hand.
Screw float onto threaded end of rod.
You threaded the eye of the needle.
Use teflon tape on threaded pipe joints.
Tighten threaded ring on the mincer attachment.
The pipe is usually threaded on both ends.
Remove threaded plug from drain fitting.
The needle thread is not threaded properly.
Bending of threaded portion of rods or bolts is prohibited.
Typical single switch model threaded connection.
See also
They are threaded throughout the abdominal cavity.
The machine head has been threaded incorrectly.
Pass threaded bolt through seat holes.
Standard representation of threaded components and joints.
Loosen threaded ring and disassemble attachment.
Clean the filter in the threaded hose.
Adjustment via threaded spindle when in place.
Threaded connection for filling the system.
Dimensions for threaded holes at gearhouse sides.
Threaded software interrupts were implemented to improve synchronization.
They lack also threaded for silencers.
The threaded barrel is supplied on each connector.
A rocket cap is threaded into the base.
Npt threaded galvanized pipe and fittings.
Installation fittings can be either sweated or threaded.
The cake threaded with spider web.
The bobbin thread has been threaded incorrectly.
Threaded rod and installation hardware not included.
So she attached a threaded needle to his clothes.
The bobbin case is not correctly threaded.
Straps must be threaded in direction of arrows shown.
Wear gloves when handling threaded rod.
Never remove threaded orifice at end of valve.
The shank may be totally or partially threaded.
Square and threaded mounting holes and.
Adjustment when installed by means of a threaded spindle.
Pressure gauges with threaded connection at the bottom.
Procedure for installing on a truss or threaded bar.
The thread of threaded joints must not be damaged.
Insert filter holder into threaded ring.
Threaded shaft to elevate the blade.
Insert nozzle into the threaded ring.
Optional threaded or extended shaft are available.
Check that the threads are threaded correctly.
Remove threaded lock nut from conduit coupling.
