Examples of 'ti content' in a sentence
Meaning of "ti content"
ti content: It refers to the subject matter or material within a specific context, such as in media, literature, or software development
How to use "ti content" in a sentence
Basic
Advanced
ti content
The Ti content on the silica support was determined.
This is presumably because the Ti content was too large.
A stringer flaw caused by titanium nitrides can be avoided by adjusting Ti content.
Such a material with a very limited Al and Ti content has a good weldability.
The range of the Ti content is automatically determined from the above range of N content.
The solid component was then measured for Ti content.
On the other hand, too high a Ti content causes brittleness.
The resulting solid catalyst component was then measured for Ti content.
In steel O, the Ti content is excessively high relative to the N content of the steel.
This attack was observed on the alloy variant with medium Ti content.
In number 19, the Ti content in the starting material was too high.
The solid component thus obtained was then measured for Ti content.
However, when the Ti content is too high, the toughness of steel deteriorates.
The Al content decreases and the oxidation resistance decreases as the Ti content increases.
Even more preferably, the Ti content is lower than 7 x N.
See also
It was clarified that low-temperature toughness improves with decreasing Ti content.
In particular, if the Ti content exceeds 0.1 %, a desired mechanical strength can not be obtained.
Furthermore, a decrease in the selectivity is described when Ti content is increased.
Furthermore, a Ti content exceeding 0.15 % may cause a tundish nozzle to be clogged up easily in casting.
The F1 value was determined by using the Ti content and the Nb content.
However, a Ti content exceeding 0.3 % saturates this effect and leads to poor economic efficiency.
In other words, in order to finely disperse TiN, the Ti content is limited.
The Ti-impregnated silica had a Ti content of 4 wt % . MAO treatment.
The solid catalyst component ( A ) was then measured for Ti content.
The resulting product was a white solid having a Ti content of 3.74 % by weight.
The resulting solid catalyst component had a Ti content of 5.5 % by weight.
The solid catalyst component thus obtained exhibited a Ti content of 2.6 % by weight.
Further, the grain refinement can be improved with a Ti content of at least 0.01 % by weight.
The resulting product was a clear pale yellow liquid having a Ti content of 4.62 % by weight.
Combined addition of Nb and V is preferable, and the Ti content is preferably 0.10 % or more.
You'll also be interested in:
Examples of using Content
Show more
On the product content and environmental release
Content management interfaces for web systems
Adjusts style and content when necessary
Examples of using Ti
Show more
Ti voglio bene come se tu fossi mio figlio
Probably the last ti he was sober enough to notice
Ti transport security threshold for radionuclide i TBq
