Examples of 'tightening torques' in a sentence
Meaning of "tightening torques"
tightening torques - This term commonly refers to the specific amount of force needed to tighten bolts or screws to a certain level of tightness
How to use "tightening torques" in a sentence
Basic
Advanced
tightening torques
Tightening torques are shown in the table opposite.
Comply with the specified tightening torques.
Tightening torques are shown in the table below.
Fixing screw sizes and tightening torques.
All tightening torques must be observed.
Check the screw tightening torques.
Check tightening torques of the screws.
Respect the shown tightening torques.
The required tightening torques of the brass nuts on brass bolts are.
Use a torque wrench to check that the tightening torques are observed.
Incorrect tightening torques can cause serious personal injury and damage.
Tighten nuts and bolts only to the recommended tightening torques.
Damaged parts or incorrect tightening torques can cause leaks on the equipment.
Please observe the notes on installation and the specified tightening torques.
The specified tightening torques of the hose clamps used must be complied with.
See also
Make sure in particular that the prescribed tightening torques are strictly adhered to.
The tightening torques and reporting requirements shall be determined for bolted connections.
Use a torque wrench to tighten parts when specified tightening torques is required.
Tighten the nuts with the tightening torques of the appropriate pressure rating.
This makes for ease of assembly guaranteeing uniformity of the tightening torques.
See the table below for tightening torques for the terminal screws.
Tightening torques are engraved on the plates to ensure proper assembly and ease maintenance work.
You will also receive a detailed installation instructions with all necessary data and tightening torques.
Tightening torques see table Torques required for tightening.
Fixing screws with wrench opening and tightening torques Size.
Tightening torques SAF INTRA with steel hanger bracket.
Please keep to the tightening torques specified on page 5.
Deviations, adjustment dimensions and the screw tightening torques.
If the tightening torques are not observed, there is a risk of leakage.
While tightening the screws, please pay attention to the correct tightening torques.
Tightening torques are presented on page 5 and at appropriate points in the text.
When replacing brake discs, ensure that the correct bolted connections and tightening torques are used.
The relevant tightening torques are listed in Table 7.
Max . permitted bearing loads Screw tightening torques.
Observe the screw tightening torques according to Table 1.
If required, ask MANKENBERG for the tightening torques.
Table 3, Tightening torques for power connections.
Please see Table 3 for the respective tightening torques for each step.
All tightening torques must always be followed Page 29.
Tighten the oil draining screw to the required torque see Table 5 - Tightening torques.
The adjusting screw dimensions and tightening torques stated in Tables 1 and 2 must be kept to.
Power cables, terminal sizes, maximum cable diameters and tightening torques.
Check the screw tightening torques Tightening torques see section 4.5.
Please use screws with a strength class of 12.9 with the corresponding tightening torques acc.
The maximum tightening torques are provided in the table on page 3 MMAX, MMED, MMIN.
Screw tightening, fasteningt For details of tightening torques see Section 9 Torques.
Section 9 - Tightening Torques Important nuts and screws.
Screw tightening, fastening For details of tightening torques see Section 9 Torques.
The screw tightening torques ( see Table 1 ) must be observed.
Tighten screws, nuts and bolts to the prescribed tightening torques see Chap . 2.4.
You'll also be interested in:
Examples of using Torques
Show more
Tightening torques are shown in the table opposite
Comply with the specified tightening torques
Tightening torques are shown in the table below
Examples of using Tightening
Show more
Tightening a screw with the impact driver at an
Replace packing if tightening does not stop leakage
Tightening when force and speed are desired
