Examples of 'timeout value' in a sentence
Meaning of "timeout value"
timeout value - a period of time set for a delay or pause before resuming an activity. This term is often used in sports, technology, and parenting contexts to indicate a break or limit
How to use "timeout value" in a sentence
Basic
Advanced
timeout value
Specifies the timeout value in milliseconds.
To represents the timer timeout value.
This timeout value is not configurable.
A compromise solution is to set a timeout value for socket operations.
This sets an upper limit on a reasonable reassembly timeout value.
This timeout value is preferably calculated from the setting under voltage.
A simple solution would at first glance be to set a very long timeout value.
If the timeout value has not been reached the wireless station continues to wait.
Here you can override the default timeout value from the program configuration.
The timeout value is either zero or non-zero.
I need to set the HTTP request timeout value.
In addition, a timeout value for the intercept should also be.
Should be sent more often than the timeout value used by the NAT.
The timeout value is used during the following activities:.
In addition to this, the field containing the timeout value does not exist either.
See also
After the timeout value has expired, the user is prompted again.
If this mechanism involves a timeout, it SHOULD be possible to configure the timeout value.
However, that timeout value is too conservative in environments where packet loss is reasonably rare.
During LLCP partitioning, the DH may subsequently inform the NFCC of a timeout value.
The timeout value should be set equal to the " maximum length of recorded buffer " parameter.
The client should back-off exponentially, probably to a maximum timeout value.
If a timeout value less than the minimum is provided, the minimum will be used instead.
The 504 gateway timeout error should be gone if the cause was insufficient request timeout value.
If you are assigning a timeout value for dedicated desktops, you can specify the maximum value.
PTS-DOS only supports the timeout value.
Increasing the timeout value allows the converter more time to complete the longer-running conversions.
Modify XProtect Advanced VMS token timeout value to avoid 'Invalid Token' error.
Enter the timeout value for outgoing connection attempts in the [ Connection Timeout ] field.
In mod_proxy, the default timeout value if.
The reassembly timeout value SHOULD be a fixed value, not set from the remaining TTL.
After expiration of the timeout value method 700 is finished.
The timeout value is limited to 24 hours; longer timeouts will be silently reinterpreted as 24 hours.
The shutdown timeout value is the maximum amount of time (in seconds).
Setting either timeout value to zero ( 0 ) indicates that the timer should never expire.
Default timeout value is set to 45 seconds.
Set the timeout value to 90 seconds.
You can set a timeout value starting at 50 milliseconds up to 29 seconds.
The initial timeout value is 45 seconds. This may be changed using the -t parameter.
You'll also be interested in:
Examples of using Value
Show more
Adjustments of value are recognized in the income statement
Promoting and reinforcing local value systems
Farms and market value of agricultural products
Examples of using Timeout
Show more
Specifies a timeout for running the script
The function registration failed due to a timeout
Changes timeout duration for menu screens
