Examples of 'tines' in a sentence
Meaning of "tines"
A tine is a prong or sharp point on a fork or similar implement
Show more definitions
- plural of tine
How to use "tines" in a sentence
Basic
Advanced
tines
Tines do not turn when throttle is depressed.
To remove all tines from the shaft.
Tines and wheels will both turn.
Insert the new tines and springs.
Flat tines for the lawn or fairway.
Keep away from the rotating tines.
Rotating tines can cause serious injury.
Do not load glasses over the tines.
Wait till tines comes to a complete stop.
Clear all debris from the tines.
Position tines vertically to avoid product buildup.
Keep cord away from rotating tines.
Just dip the tines of your fork in it.
Release the lever to stop the tines.
The smaller tines produce higher notes.
See also
The fork has three or four tines.
This has two tines close together.
Cable riding plough with spring tines.
The tines can include a grasping portion.
Never operate the tines over gravel.
The fork advantageously comprises two tines.
Keep clear of cultivator tines at all times.
The tines become very sharp from use.
You will be working four tines as hard.
Clean the tines with a hose and water.
I like the feeling of the tines on my teeth.
Tines do not stop immediately after switching off.
All you need to do is to adjust the tines.
The number of rows of tines can be changed.
The tiller sits between the tines.
It is found in combination tines of the young animal.
Check out the thickness of the tines.
Sliding bowl tines on some models.
Tines that fold down allow loading versatility.
Protect shaft and tines from falling material.
Tines are sharp and spin fast.
Sharpen or replace tines when necessary.
The tines of the fork are bent.
Slide the four tines off the shaft.
Wipe tines with oiled rag to prevent rust.
Never attempt to force the tines to come to a standstill.
The tines of the fork were bent.
Motor housing with tines and frame tubing.
Tines for rotary harrows accessories.
This prevents tines from scuffing the ground.
Tines continue to rotate when lever is not engaged.
Clean the tines with water.
Load bowls securely between the rows of tines.
The short tines will snap into place.
Injury may occur when working on the tines.
