Examples of 'tip holder' in a sentence
Meaning of "tip holder"
Tip holder typically refers to a small container or device used to hold and store tips of various kinds, such as paintbrush tips, pen tips, or soldering iron tips. It helps to keep the tips organized and protected from damage. This phrase is commonly used in the context of arts and crafts, writing instruments, or electronic repairs
How to use "tip holder" in a sentence
Basic
Advanced
tip holder
Debris between the tip and tip holder.
Clean the tip holder and use new tip.
Equipped with two smooth rollers and a tip holder.
Install quick connect tips to tip holder and secure to the pressure washer handle.
Do not insert a bit tip without a bit tip holder.
One has to change tip holder to change SPM mode.
Make sure the pipette tip is properly attached to the tip holder.
Create your own review for Tip holder polished aluminum with embedded magnets.
The pipette tip has a chamber for receiving the stem of the tip holder.
The tip holder 2 narrows conically downwards.
Liquid has penetrated the tip holder and dried.
A tip holder 8 is screwed to a lower end of the train of rods 6.
It can not be used with bit tip holder extensions.
Internal cleaning - We recommend that you regularly check pistons, springs, seals and the tip holder.
Remove the diamond-shaped tip holder from the sanding base.
See also
Further, a part of the tip is extended out of the tip holder.
In particular, make sure the tip holder 7 is clean and undamaged.
The pipette filter 15 is easy to remove by pulling it out of the tip holder 7.
The tip 7 and the tip holder 8 define a welding unit.
Thus the pipette tip 3 can be attached to the tip holder 2 by friction.
The tip holder 8 also comprises a lower cylinder 8 b with diameter D 8.
Figure 9 - Insert spray tips into the rubber tip holder.
A body including a tip holder ( 2 ) and a bore passing through the body and tip holder ;.
Insert spray tips into rubber tip holder See Figure 10.
This conical tip 10 comprises a cylindrical housing 10 b for receiving the lower cylinder 8 b of the tip holder 8.
An annular step 12a is provided at a predetermined position in the tip holder 12 to support a spring 51.
Prior to installing the detachable tip 11 on the tip holder 12.
That conical tip 10 ′ is provided to be assembled with a tip holder 8 ′ with the same diameter.
FIGS . 3 and 4 show the step where the detachable tip is fitted onto the tip holder 12.
Insulation means 20 are interposed between the nozzle 5 and the tip holder element 8.
FIG . 15 shows the vibrating means in the tip holder.
You'll also be interested in:
Examples of using Tip
Show more
People used to tip big in those days
Tip up and hold to tune more quickly
Just do not tip the table over
Examples of using Holder
Show more
Support file holder on cutter top plate
Holder advertising material itemnumber price per
This battery holder part is not waterproof
