Examples of 'titanium content' in a sentence
Meaning of "titanium content"
Titanium content: Refers to the amount or proportion of titanium present in a material, often used in the context of metals or alloys
How to use "titanium content" in a sentence
Basic
Advanced
titanium content
The optimum titanium content is influenced by a number of factors.
The solid catalyst component was measured for titanium content.
A low titanium content results in improved activity and improved selectivity.
The quantity of catalytic solid used is determined as a function of its titanium content.
The titanium content is to be adjusted according to the formula discussed hereinbelow.
The solid catalyst component thus prepared was measured for titanium content.
The titanium content of the alumina can be measured by any appropriate technique.
Such is accomplished by replacing the reduced titanium content with sufficient niobium.
The titanium content in the solid component was measured by the following method.
The difficulty in welding generally increases with increasing aluminum and titanium content.
The catalysts have a similar titanium content while substantially different amounts of titaniumchloride were used.
The solid catalyst component thus obtained was then measured for titanium content.
The propylene polymers are characterized by a low titanium content in combination with a low aluminium content.
The titanium content of the supported catalyst thus obtained can vary within a wide range.
It is named for its Titanium content.
See also
The titanium content is preferably added to the melt, before casting.
Its mineralogical name is Titanite because of its titanium content.
The catalyst has a high titanium content and a high activity when used to polymerise olefins.
Colors on the Moon are dominantly controlled by variations in iron and titanium content.
Accordingly, the titanium content must be maintained within the stated range of this composition.
A method according to claim 3, which further includes by controlling the titanium content.
The titanium content on the catalyst is measured by X-ray fluoresence.
It has a residual titanium content of about 10 ppm.
The solid component ( b ) was then measured for titanium content.
The measured titanium content in the polymer solution is shown in Table 4.
The produced white powder had a titanium content of 19 ppm.
The maximum titanium content is therefore specified at 2 %.
The product from step ( c ) having a reduced titanium content is recovered.
Its titanium content is equal to 3 ppm.
It is silent, however, about the titanium content of the final product.
The solid catalyst component ( A1 ) was then measured for titanium content.
Recovering the product having a reduced titanium content from step ( iv ), this product is called component A ;.
The titanium content expressed as TiO2 in this separator is 26 %.
Under conventional electrolysis conditions, the titanium content dissolved in the bath is 4 %.
Ti ( ppm ), titanium content of the final polymer or copolymer.
The titanium-containing molecular sieve advantageously may have a titanium content of from 1 to 10 weight percent.
The titanium content in the solid catalyst component was 1.7 wt %.
Zinc plates, with a Titanium content.
The titanium content in the solid catalyst so produced was 4.6 %.
FIG . 1 shows the influence of the refining agent and the titanium content on the parameter p *.
The titanium content in the solid catalyst component was 3.2 mass %.
The catalyst had a titanium content of about 2 wt. %.
The titanium content of the resultant solid catalyst component was determined as 2.06 % by weight.
Another specimen revealed a 74 % titanium content.
The titanium content of this support can range from 1 % to 10 % by weight of the catalyst.
Specifically, an increase in titanium content was 0 wt %.
The resulting solution was clear and faintly yellow and had a titanium content of 1.9 % ( calculated ).
The resulting reddish-brown powder showed a titanium content of 7.7 % and an average particle size of 18 microns.
The solution became insoluble if the titanium content was higher than 0.8 %.
The solid catalyst component thus obtained had a titanium content of 2.25 % by weight.
You'll also be interested in:
Examples of using Content
Show more
On the product content and environmental release
Content management interfaces for web systems
Adjusts style and content when necessary
Examples of using Titanium
Show more
Argex titanium announces closing of private placement
These guys make titanium ski bindings
That titanium leg is worth as much as a car
