Examples of 'tone controls' in a sentence
Meaning of "tone controls"
Tone controls are electronic circuits or mechanisms that allow adjustment of the audio output's frequency response in audio equipment, such as amplifiers or speakers. They enable users to modify the tone or sound quality by manipulating specific frequencies, such as bass, midrange, or treble, to suit personal preferences or acoustic conditions
How to use "tone controls" in a sentence
Basic
Advanced
tone controls
Tone controls to their flat or defeated positions.
Very sensitive volume and tone controls.
Set tone controls to lower position.
It has been a while since we looked at tone controls.
Also absent were tone controls and a power switch.
Tone controls for a unit inserted into the com.
Do not boost tone controls indiscriminately.
Adjust the desired sound with the tone controls.
It does not have any tone controls or volume controls.
Most people are familiar with bass and treble tone controls.
These are classic passive tone controls that influence one.
The power amplifiers did not have volume or tone controls.
Start with the tone controls in the centre position.
The instrument came with two volume and two tone controls.
Turn the volume and tone controls to yield an appropriate volume.
See also
They are prepared as security covers for the setting of volume and tone controls.
These are the tone controls.
The tone controls affect the sound output from both channels.
Bass and treble tone controls.
He contended that tone controls represented a cost of manufacture yet were detrimental to sound quality.
You can only use the tone controls when.
Pressing the Amplify button during a call will turn off the additional amplification and tone controls.
Here are the tone controls.
The tone controls provide more range than the blackface Deluxe or Bassman.
This is why its input sensitivity and tone controls are not easily accessible.
The tone controls on the front side will not affect the AUX OUT signal.
Adjust the desired sound with the tone controls for each channel.
Adjust Tone Controls for desired sound quality.
Push in the Tone Switch if you want to adjust the Tone Controls.
Independent volume and tone controls available for line and microphone inputs.
Selectable Normal and Drive Channels with independent volume and tone controls.
Please be careful when using the tone controls in order not to overload the loudspeakers.
Many audiophile-oriented preamplifiers lack tone controls.
Direct playback bypasses the tone controls for the most accurate reproduction of a source.
If necessary, correct the adjustment of the mixing and tone controls.
Higher settings of the tone controls increase the amount of energy supplied to the loudspeakers.
Again, you might find different configurations of tone controls and.
They used the preamp tone controls in combination with the tone controls on the guitars.
These input jacks are not affected by the amplifier 's volume or tone controls.
When in HOT mode the tone controls still affect the sound slightly.
There is no on/off switch for the MediaMate speakers or any tone controls.
The DIRECT function bypasses all tone controls bringing the sound unchanged to the speakers.
Then adjust the sound for the channel as desired with the tone controls 6.
Amplifier 's tone controls are set too high.
Adjust the sound for each input channel separately with the tone controls 4.
Set the tone controls, and balance control to.
Turn the volume and tone controls, and bal.
When the tone controls are at centre, the frequency response is linear.
The 2 aux inputs have independent tone controls common for both aux inputs.
Set the tone controls on your amp / mixer to flat or a neutral position.
You'll also be interested in:
Examples of using Tone
Show more
Perfect muscle tone does not hurt either
Tone arm rest with locking mechanism
To output a test tone from adjacent speakers
Examples of using Controls
Show more
Turn off all controls before unplugging
Controls that ensure firearms are securely stored
The digital controls go out during use
