Examples of 'tonearm' in a sentence
Meaning of "tonearm"
tonearm (noun): A tonearm is a part of a turntable or record player that holds the cartridge and stylus, allowing the needle to track the grooves of a vinyl record
Show more definitions
- The pivoting bar that holds the pickup of a record player and conducts the resulting signal to the amplifier.
How to use "tonearm" in a sentence
Basic
Advanced
tonearm
The tonearm counterweights are removed for shipping.
Carefully lower the tonearm on the record.
The tonearm should be balanced to a horizontal position.
The manufacturer for the tonearm adjustments.
Put the tonearm back into place.
It was followed by a more advanced version of the tonearm.
Tonearm rest and removable transport lock.
Rega is famed for its tonearm designs.
Set the tonearm lift to the down position.
It seems to be a good move to buy a used tonearm.
Tonearm rest with locking mechanism.
After that connect the tonearm to your phonostage.
Tonearm with counterweight and interconnects.
You can use the tonearm tube as orientation.
Tonearm and return it to rest on the arm clip.
See also
Lift the tonearm from the.
Do not attempt to adjust or tighten any tonearm components.
And tonearm assembly to prevent damage during transport.
Carefully connect the cartridge to the tonearm cable.
Lower the tonearm slowly onto the record.
Screw the system on the tonearm.
Place the tonearm on the desired location of the record.
If it is necessary you can adjust the height of the tonearm.
Move the tonearm back to the armrest and clamp it.
Been delivered with another tonearm base that you have.
Tonearm lift with hydraulic action and lift lever.
The set of parameters of this system determine characteristics of tonearm.
Never interchange tonearm tubes while the turntable is powered on.
Undesirable performance may be a result of an improperly adjusted tonearm or worn cartridge.
Do not stop the tonearm manually when it is returning automatically.
Remove the the stylus cover and release the tonearm.
Connect the tonearm wires to the cartridge pins as follows.
When the record is finished the tonearm will automatically stop.
Hold the tonearm in the middle with one hand.
I did find it a little awkward to get the tonearm properly set up.
The tonearm and cartridge were tuned with professional equipment.
The white marking on the tonearm points to any value on the scale.
The tonearm was different to the previous models as it was made from titanium.
Remove the nylon tie used to secure the tonearm during shipment.
Gently lower the tonearm onto the record to start playing.
This turntable had a sensor arm that was built next to the tonearm.
Connect the tonearm wires with the cartridge pins as following.
Cartridge must be securely connected to the tonearm whenever you are using the turntable.
Lift the tonearm from the record and return it to the rest.
Turn it lightly and it will screw onto the rear shaft of the tonearm.
The tonearm descends slowly onto the record and play begins.
The tray is aluminum while the tonearm has beautiful finishes and is adjustable.
The tonearm external phono leads must be connected to a suitable phono stage.
Twist it lightly and it will screw onto the rear shaft of the tonearm.
The tonearm will be lifted and return to the tonearm stand automatically.
