Examples of 'tool diameter' in a sentence
Meaning of "tool diameter"
tool diameter - Tool diameter refers to the size or measurement of a tool, particularly in technical or mechanical contexts where precision is crucial for proper functioning
How to use "tool diameter" in a sentence
Basic
Advanced
tool diameter
Precise tool length and tool diameter measurement.
The tool diameter can be made relatively small.
Automatic compensation of the tool diameter.
The minimum tool diameter values listed in this table are typical values.
Step over can be as much as the tool diameter if required.
Nominal tool diameter Drilling diameter work piece.
The size of the compensation is the same as the tool diameter.
The tools used have a tool diameter which exceeds the floor thickness.
Milling a guide slot slot width larger than the tool diameter.
The Tool diameter is taken into account in the final part distance.
Slot milling the slot width is the same as the tool diameter.
Tool diameter maximum Tool diameter minimum.
The width of the nugget is usually slightly more than the tool diameter.
Tool Diameter in mm.
Instrument for measuring min / max tool diameter and tools axial position.
See also
Guide-groove milling the slot width is greater than the tool diameter.
Calculate the ideal rotational speed, tool diameter or cutting speed for your PFERD-tool.
If you are using IGEMS tool radius compensation, then the command ask for a tool diameter.
For the greater holes, a corresponding tool diameter may be about 6 mm.
The tool diameter may be of the order of 150 mm for example.
All milling paths are automatically created and displayed ; the tool diameter is taken into account.
The maximum tool diameter mounted on the spindle lowered under the table at 90 is 240 mm.
To do this, you must enter the Tool length and Tool diameter for every tool.
Choose the path adjustment ( inside or outside ) and set the tool diameter.
Stepovers for 2.5D mill roughing can now be set as large as the tool diameter itself.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
