Examples of 'tool is running' in a sentence
Meaning of "tool is running"
This phrase typically refers to the operation of a software tool or application. When a tool is running, it means that it is actively executing tasks or processes as intended
How to use "tool is running" in a sentence
Basic
Advanced
tool is running
When the tool is running under load.
Do not change settings while tool is running.
Make sure the tool is running at full speed.
This can be done even while the tool is running.
This indicates the tool is running at first speed setting.
Never change speeds while the tool is running.
Check that the tool is running properly and can.
It is locked to avoid switching when the tool is running.
Make sure the tool is running at full speed before making.
Screw while the power tool is running.
Make sure the tool is running at full speed before making a cut.
Do not try to change gears when tool is running.
Once the tool is running you can release the lock off button.
Never touch the blades while the tool is running.
Once the tool is running you may release the lock off button L1.
See also
Orbital action may be adjusted when the tool is running.
Trimming branches - Make sure the tool is running at full speed before making a cut.
Reaching into the housing whilst the tool is running.
Orbital action may be adjusted when the tool is running or stopped.
Never remove drilling chips from the drilling area while the power tool is running.
Do not rotate the change lever when the tool is running under load.
Maintain Safety Devices Do not open or remove safety shields while the tool is running.
Apply only slight pressure downwards while the tool is running at full power.
Your tool 's high RPM makes imbalances easily detectable as a wobble while the tool is running.
Strokes per minute may be adjusted when the tool is running or stopped.
Operation Direction control WARNING, NEVER change the direction of rotation while the tool is running.
Reaching under the base whilst the tool is running and.
Do not open or remove safety shields while the tool is running.
The chuck can not open inadvertently while the tool is running in reverse rotation.
Do not install or remove the dust extractor while the tool is running.
Orbital action may be adjusted whether the tool is running or not.
The tool speed can be changed instantly while the tool is running.
NOTE, Do not change gears when tool is running.
Do not actuate the clamping lever while the power tool is running.
When the low nail indicator 17 is visible, the tool is running low on fasteners.
The cutting flutes on bits will cut you if touched while tool is running.
NEVER make any adjustments while tool is running.
Do not attempt to change the sanding paper while the power tool is running.
Orbit action may be adjusted when the tool is running.
Do not rotate the change lever when the tool is running.
Do not select the operating mode when the tool is running.
Never cross gravel paths or roads while the tool is running.
Never touch the cutting line while the tool is running.
The hopper or near the blade when the tool is running.
Do not operate the spindle lock while the tool is running.
Do not use the speed change lever while the tool is running.
Remove the anchor from the hole while the tool is running.
Adjust the compressor regulator to tool maximum while tool is running free.
Do not attempt to engage the shaft lock while the tool is running.
Do not use the action mode change lever while the tool is running.
You'll also be interested in:
Examples of using Running
Show more
I can not keep running people over
Running a political campaign gets really expensive
It was an armed man running at me in the subway firing at me
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
