Examples of 'tool oil' in a sentence
Meaning of "tool oil"
tool oil: Typically refers to a specific type of lubricant or maintenance substance used for lubricating, protecting, or cleaning tools and machinery
How to use "tool oil" in a sentence
Basic
Advanced
tool oil
Excessive air tool oil in tool.
Coat all vanes with quality pneumatic tool oil.
Use only pneumatic tool oil specified in this manual.
It should be regularly checked and filled with air tool oil.
Only use air tool oil to lubricate the tool.
Lubricate the air motor daily with quality air tool oil.
Use only special tool oil for this purpose.
Lubricate the tool daily with a good grade of air tool oil.
Pour air tool oil into air inlet per instructions.
Lubricate the sliding portions with tool oil to prevent rust.
Lubricate using air tool oil and grease according to the directions.
Lack of lubrication Lubricate tool using approved pneumatic tool oil.
Lubricate with air tool oil and operate trigger briskly.
Use a lightweight machine oil such as “ sewing machine ” oil or pneumatic tool oil.
Pour a generous amount of air tool oil into air inlet.
See also
Air tool oil is the only recommended lubricant for use in all air tools.
Avoid adding too much air tool oil during normal use.
If air tool oil is not used, lubricate the tool after cleaning.
Place a few drops of pneumatic air tool oil into the air inlet.
Drops of air tool oil or SAE10 nondetergent oil into the air.
Lubricate with DeWALT Pneumatic Tool Oil or winter weight.
Only use special tool oil with a high viscosity thin fluid.
Before daily use, add a few drops of air tool oil in air inlet.
Coat the cutting line with tool oil to increase the punch and die service life.
Always ensure that the rotor is adequately lubricated ( pneumatic tool oil only ).
Air tools may contain traces of tool oil and other lubricants and so must.
The in-line oiler should be regularly checked and filled with air tool oil as needed.
Pour a generous amount of air tool oil into air inlet ; check for dirt.
Put 5 to 7 drops of non-detergent SAE 20 weight pneumatic tool oil in the air.
Use a mineral-based air tool oil Ambient temperature ºC.
Squeeze approximately 1 oz. of Campbell Hausfeld air tool oil in the oil port hole.
Place 2-3 drops of air tool oil ( not provided ) into the male plug before each use.
Put 5 to 7 drops of BOSTITCH pneumatic tool oil in the air inlet.
Place five or six drops of pneumatic tool oil ( not included ) into the air inlet.
When replacing O-rings or Cylinder, lubricate with air tool oil before assembly.
Put 5 to 10 drops of DEWALT Pneumatic Tool Oil or winter weight pneumatic oil containing.
Put 5 to 7 drops of PORTER-CABLE pneumatic tool oil in the air inlet.
Squeeze approximately 1 oz. of air tool oil in the oil port hole.
Use SAE 10 weight oil if air tool oil is not available.
When replacing O-rings or cylinder, lubricate with air tool oil ( not included ) before assembly.
When replacing " O " rings or Cylinder, lubricate with air tool oil before assembly.
Insert 5 - 7 drops pneumatic tool oil into the air.
You'll also be interested in:
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
