Examples of 'tool rest' in a sentence
Meaning of "tool rest"
tool rest: a 'tool rest' refers to a support or platform used in woodworking or metalworking to hold and guide cutting tools. It provides stability and safety for the tools and helps the user maintain precision and control during the crafting or shaping process
How to use "tool rest" in a sentence
Basic
Advanced
tool rest
Top tool rest height adjusts up or down.
Unplug tool and lay it on its tool rest.
Use the tool rest or another practical.
Adjust the spark guard and tool rest.
Position the tool rest as close to the workpiece as possible.
Replace the guards and adjust the tool rest.
Mount the opposite side tool rest in a similar manner.
Hold the workpiece firmly and against the tool rest.
Use the tool rest to keep the work piece steady.
Repeat the procedure for the left side tool rest.
Brace it on the tool rest to keep the shaft from turning.
Hold the work piece firmly against the tool rest.
Proceed to install the other tool rest using the same description.
Repeat the assembly operation for the second tool rest.
Use the tool rest to support the workpiece during grinding when possible.
See also
This position also coincides with the tool rest position.
The top tool rest can be used to assist in the sharpening process if desired.
The height should be chosen so that the tool rest is at about elbow height.
Adjust each tool rest frequently to compensate for wear of the grinding wheel.
Follow the diagrams to ensure the correct tool rest is fitted to the correct side.
Position tool rest so that distance between tool rest and grinding wheel is a maximum.
Tighten the locking knob firmly to retain the tool rest position and angle.
Adjust the tool rest to allow the front part of the wheel dresser to hook.
This prevents the workpiece from slipping down between the wheel and the tool rest.
Attach the other tool rest to the right side of the other tool rest arm.
As the wheels wear down, adjust the tool rest accordingly.
The electric tool rest rotates when changing the tool and can not be positioned.
Reinstall headstock, tool rest and tailstock.
Adjusting tool rest Adjusting tailstock Installing bed extension Installing bed extension on leg.
When sanding, remove the tool rest from the machine.
The tool rest is adjustable, and therefore, you can remove objects with precision and accuracy.
For face plate turning the tool rest is set slightly lower than centre line.
Do-Support long work with an outboard tool rest.
The movable spindle and the movable tool rest are freely movable in both horizontal directions.
If tool rest post begins to slip, tighten up the hex socket cap screw E.
Place the gouge against the tool rest and move it slowly into the spinning wood.
DO - Support long work with an outboard tool rest.
One tool rest has a V-groove that is correctly angled for most drill bits.
At this point the headstock, tailstock and tool rest should be removed.
NOTE, The grooved tool rest mounts on the left side of grinder.
To prevent shaft rotation, place a wedge between the grinding wheel ( C ) and the tool rest D.
As the grinding wheel wears down, readjust the tool rest closer to the grinding wheel.
Finally a tool rest that will keep up with your imagination & creativity!
Bring the workpiece / tool rest 5 close up to.
When the tool rest is positioned correctly, tighten the hardware ( C ) and F.
Rotate dry wheel ( H ) making certain wheel does not contact tool rest A.
Workpiece on the workpiece / tool rest 5 and slowly bring it up to the grinding wheel 4.
Loosen, but do not remove, the tool rest bolts 8.
Third tool rest ( movable body ).
The gap between the wheel and the tool rest should not be greater than 1/16 ”.
You'll also be interested in:
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
Examples of using Rest
Show more
We will rest here for a short time
You can have all the rest
The rest of the international community should
