Examples of 'tool speed' in a sentence
Meaning of "tool speed"
The phrase 'tool speed' typically refers to the velocity or rate at which a tool or instrument operates or performs a specific function. It pertains to the speed or efficiency at which a particular tool accomplishes its intended tasks or objectives
How to use "tool speed" in a sentence
Basic
Advanced
tool speed
Check tool speed regularly with a tachometer.
Some guidelines regarding tool speed.
Tool speed and blade selection chart.
Sampling rates of the echo pulses are adjusted to tool speed.
Tool speed is increased by increasing pressure on the switch trigger.
Adjust the desired tool speed for the kind of work.
Tool speed is increased by increasing rotation force on the switch.
Variable speed trigger controls tool speed for cutting specialized materials.
Tool speed can be adjusted by turning the speed change knob.
Accessory ratings must always be above tool speed as shown on tool nameplate.
The tool speed can be adjusted by turning the adjusting dial.
Simplify the identification of rated tool speed via a unique corresponding color match.
The tool speed can be changed instantly while the tool is running.
A speed control screw is provided so that maximum tool speed can be limited variable.
The tool speed depends on how far you press the switch.
See also
The pressure exerted on the variable speed switch determines the tool speed.
The tool speed depends on how far you depress the switch.
A speed adjusting dial is provided so that maximum tool speed can be limited variable.
The tool speed can be infinitely adjusted by turning the speed adjusting dial.
Use only router bits with proper shank diameter and suitable for the power tool speed.
You can adjust the tool speed by tapping the main power button.
Tool speed set too high Decrease tool speed.
Also refer to the accessory manufacturer 's instructions, with regards to tool speed selection.
Changing the tool speed before the tool stops may damage the tool.
Incorrect combinations of grinding wheel, wheel guard and tool speed could result in injury.
Tool speed set too low Increase tool speed.
In reverse ( LH ) rotation the tool speed is automatically reduced for easy screw removal.
Slide the Speed Control Dial upwards on to a lower number, to decrease the tool speed.
Base the tool speed values on the Material List.
Turn the Variable Speed Dial to a higher setting, to increase tool speed 2.
The tool speed setting is adjustable from 1 to.
To switch the tool on, press the variable speed switch ( 1 ) . The tool speed depends on.
The tool speed is increased by increasing pressure on the switch lever / trigger.
Adjust the Speed Control Dial ( 7 ) on to a higher number, to increase the tool speed.
Max . cutting tool speed Brush cutter Grass trimmer.
Slide the Speed Control Dial ( 12 ) downwards on to a higher number, to increase the tool speed.
The tool speed depends on the variable speed control knob ( 3 ) setting.
Tool speed combinations are shown in Fig . 6.
You'll also be interested in:
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
