Examples of 'tool surface' in a sentence
Meaning of "tool surface"
tool surface - This phrase refers to the outer layer or area on a tool that is in contact with the material being worked on. It can also be used to describe the visible part of a tool that is used for a specific purpose
How to use "tool surface" in a sentence
Basic
Advanced
tool surface
This causes rapid wear of the tool surface.
The tool surface is held below the matrix resin melt temperature.
The bladder is flexible and not a hard tool surface.
The state of the tool surface is critical to the adhesion of the coating.
The composite plies include a groove substantially surrounding the tool surface.
The condition of the tool surface is crucial to the adhesion of the coating.
This allows the release agent to preferentially migrate to the colder tool surface.
To coat the tool surface with advanced coatings is the most efficient solution.
In this way the heat transfer into the tool surface can be changed.
The tool surface may be finish machined after welding to machine it to final tolerance.
Equally the joints of the pins may be welded together to provide a continuous tool surface.
A tool having a tool surface adapted to contact a composite resin part layup ;.
The mold layer includes a surface that forms at least a part of the tool surface.
The negative charge on the tool surface 25 results in an electrostatic force F FIG.
Fabrication of a composite part involves depositing reinforcing fibers on a tool surface of a layup mandrel tool.
See also
The film was on a tool surface in a vacuum-bag-only-pressure apparatus.
The device comprises a compactor adapted to form the composite laminate stiffener onto a curved tool surface.
Note 2 Depending on range, tool surface finish, machine environment and installation.
The additional layer is then machined, if desired, to form a modified tool surface.
The tool surface defines the outer mold line ( OMI ) of the fiber-reinforced resin material.
As a result, the protrusion of the diamond particle above the tool surface is insufficient.
The tool surface 14 is shaped to the profile of the workpiece ( not shown ).
This method laser engraves tool-related data onto the cutting tool surface.
To change the curvature of the tool surface 122 as desired.
The laminates identified in Table 4 are in ascending order from a plate glass tool surface.
May be laid up over the mandrel tool surface 30 to form a desired layup 24.
Glass shards and / or abrasive polishing grains become embedded in the tool surface with time.
Machined tool surface 32 shows a machined surface where material is removed from mold layers 22 and 24.
The dome-shaped polisher head has a size which generally corresponds to the tool surface being polished.
Machined tool surface 34 shows a machined surface that extends completely through two mold layers 24 and 26.
For a female OMI tool, place the cells face down on the tool surface.
Conductive tool surface with 10 ^ 6 Ω resistance combined with the familiar properties of a tooling-gelcoat.
For a male OMI tool, place the cells facing away from the tool surface.
These plates have been injection molded at a mold temperature of 210°C and a tool surface temperature of 40°C.
In use, a plurality of the tool elements 12 are tessellated to form a continuous tool surface.
In use, this material 1 is laid on the tool surface 4.
These combined movements allow the applicator head 28 to traverse substantially the entire tool surface 26a.
The forming force F causes the stiffener 42 to be formed down onto the curved tool surface 48.
May be laid up to form a layup 24 conforming to the tool surface 30.
The strips 3 of tape 1 adapt to the contoured tool surface 7.
Thus, the compactor 74 has a curvature that is greater than the curvature of the tool surface 48.
Once in position, the actuators can self-clamp to maintain the shape of the tool surface 122.
You'll also be interested in:
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
