Examples of 'tool wear' in a sentence
Meaning of "tool wear"
The gradual deterioration or damage that occurs to a tool or equipment over time due to regular usage or friction
How to use "tool wear" in a sentence
Basic
Advanced
tool wear
Tool wear and tool breakage detection.
Production stop after tool wear.
Excessive tool wear occurs during machining.
The method is unaffected by tool wear.
Identify tool wear cause with your phone.
Lower tool costs thanks to reduced grinding tool wear.
Identify tool wear causes with your phone.
This reduces tool wear.
Correct tool wear from tool inspection mode.
The present invention also can be effective in controlling tool wear.
Tool wear will be greatly increased if excessive pressure is used.
When using this tool wear the next safety equipment.
Tool wear analyzer.
The low melting point of zinc also minimises tool wear.
Tool wear is very high due to the extreme toughness of the material.
See also
When using this power tool wear the following protective items.
Tool wear is inevitable and managing it is essential to achieve successful machining operations.
The resulting position values can be used for tool wear compensation.
The stone or tool wear increases as the amount of stock removal increases.
Lower cutting forces reduce power consumption and reduce tool wear.
Interface enabling tool wear correction by an external system that measures the workpiece.
Do not exceed recommended maximum operating pressure as tool wear will be greatly increased.
Regular and stable tool wear are the ideal conditions for the service life.
Dirt and water in the air supply are major causes of pneumatic tool wear.
Such control aids in minimizing tool wear and distortion of the work piece.
Inputting and checking tool offsets and checking for excessive tool wear.
Using excess pressure increases tool wear on the plier and wastes compressed air.
This research work has been finished by a preliminary study on cutting tool wear mechanism.
Low tool wear permits the use of higher cutting speeds resulting in increased productivity.
Annealed material is easier to form and cut and produces less tool wear.
Tool calibration is standard Tool wear needs to be kept under control.
The metal particulates generally will not result in significantly increased tool wear.
Changing the Tool Wear protective gloves when changing the tool.
This reduces the machining time but increases machine chatter and tool wear.
An optical in-process tool wear measurement system.
Optimizing production by maintaining full control over machining parameters and minimizing tool wear.
Thus, tool wear is intrinsic to the process.
This also helps to minimize noise and vibration which in turn reduces tool wear.
If lubricants are not used, tool wear will be excessive.
Important cost savings result from the high cutting rates combined with very low tool wear.
In addition, it cuts down tool wear by reducing feed problems.
Minimum quantity lubrication, reducing tool wear.
Load monitoring-detecting tool wear and breakage during machining.
Cement-sand base leads to a rather high abrasive tool wear.
The tool wear mechanisms predominant were diffusion, abrasion and adhesion attrition.
Moreover, a misunderstanding of these parameters may lead to an undesirable premature tool wear.
This research aims to monitoring the tool wear when turning aluminum-silicon alloys.
These reduce friction and temperature, thus reducing the tool wear.
Tool wear is mainly on the exchangeable cutting head, extending the life of the adaptor.
Thus, it obviously seems that v decreases when the tool wear increases.
You'll also be interested in:
Examples of using Wear
Show more
I will be sure to wear my cap and gown
I wear shorter skirts than my teenage daughter
The director wants me to wear it during performances
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
