Examples of 'top cap' in a sentence
Meaning of "top cap"
top cap ~ a head covering, usually made of fabric or material, worn on the head and suitable for formal occasions or as a fashion accessory
How to use "top cap" in a sentence
Basic
Advanced
top cap
New top cap with external preload.
Filling is accomplished by removing the top cap.
An insulated top cap is the negative terminal.
Loosen the compression damper top cap.
Top cap designed for air ventilation.
The base has a top cap secured thereto.
The clip is enveloped inside of the top cap.
Place top cap into position on the canister.
Do not scratch the top cap.
Remove the top cap from the air tube.
The airflow is adjusted by rotation the top cap.
Remove the top cap with its rubber membrane.
The vial is capped with a crimp top cap.
Install the compression top cap retaining nut by hand.
The assembly can also include a top cap.
See also
Top cap toggle system.
The filter was first tested without a top cap.
The top cap can be configured to include a latch mechanism.
Apply a small amount of grease to the top cap threads.
A top cap guarantees the hermeticity of the empty chamber.
Install the detent spring onto the top cap.
The top cap has an inlet opening formed therethrough.
The air spring tube is attached to the top cap.
Replace the top cap and tighten the three screws.
Press down firmly when loosening the top cap.
Thread the top cap onto the lower post by hand.
Deploying the top cap.
Thread the top cap into the upper tube by hand.
Slightly curved top cap.
Press the air top cap into the air tube.
A top cap is connected to the collar and secured into a denture.
Thread the damper top cap into the upper tube.
The top cap is axially spaced from the closure cap.
Never operate the unit without the top cap in place.
Tighten the top cap until it is flush with the upper tube.
Install the air valve cap onto the top cap.
Headset top cap.
Loosen the stem bolts and remove the top cap.
Remove the top cap by lifting it off of the top of the unit.
The top of the cylinder was covered with a mesh top cap.
Remove the air spring top cap from the upper tube.
The top cap is made out of a short piece of thick wall casing pipe.
A vent having the same diameter as the top cap was used.
Mount top cap onto driver and insert four hex bolts into.
Insert and thread the top cap into the upper tube.
Remove the two screws on each side at the rear of the top cap.
Apply a small amount of grease to the top cap detent spring holes.
Press flip top cap firmly into the opening to get the best seal.
The tear band must be removed before a top cap can be unscrewed.
Keep the screws and top cap so they can be used on the opposite side.
