Examples of 'torque adjustment' in a sentence
Meaning of "torque adjustment"
torque adjustment: Torque adjustment refers to the process of modifying the amount of rotational force applied to a mechanical system. In engineering and mechanics, torque adjustment is crucial for ensuring that machines operate efficiently and safely
How to use "torque adjustment" in a sentence
Basic
Advanced
torque adjustment
Set torque adjustment see enclosed manual.
Coaxial pinion with height and torque adjustment.
Set the torque adjustment ring to the drilling position.
The torque is adjusted by rotating the torque adjustment ring.
Loosen set screws of torque adjustment nut on the gear reducer.
These units are equipped with a combination percussion action and torque adjustment collar.
Check torque adjustment and safe location of the adjusting nut.
The motor effects this number of revolutions with a force corresponding to the torque adjustment.
The torque is less when the torque adjustment ring is set on a lower setting.
Torque adjustment is carried out by turning the adjusting nut 4.
Be sure to fully loosen the torque adjustment cap before attaching the tremolo arm.
Standard coaxial pinion, b coaxial pinion with height and torque adjustment.
Check the torque adjustment and that the adjusting nut sits securely.
Regardless of the position of the torque adjustment collar E.
Check the torque adjustment and ensure that the adjusting nut is sitting securely.
See also
The only maintenance work needed is a regular inspection of functionality and torque adjustment = > yearly.
The respective torque adjustment or the adjustable torque range are visible on the type tag.
The tremolo arm is a plug-in type with a torque adjustment cap incorporated into the arm.
Excessive torque adjustment may jeopardise the anti-squash safety function.
Correct cup spring layering is a prerequisite for problem-free clutch function and torque adjustment.
On the other hand insufficient torque adjustment may not guarantee correct opening or closing strokes.
The IGEA-BT model controller is not equipped with mechanical torque adjustment.
The applicable torque adjustment range is printed on the Type tag.
EAS - Compact with adjusting nut for radial torque adjustment.
The Edge III Tremolo has two torque adjustment screws for the tremolo arm.
Set the torque adjustment collar ( d ) to the appropriate number setting for the torque desired.
Select the desired torque number using the torque adjustment collar ( C ) on the top of tool.
These limit torque adjustment means vary for example the limit torque as follows,.
The torque is adjusted by rotating the torque adjustment ring See Fig . F.
Define the torque adjustment in percent of MG max . using the formula below.
There is a worklight ( h ) located under the torque adjustment collar c.
NOTE, The torque adjustment collar may be set to any number at any time.
For drilling in masonry, set the torque adjustment collar 8.
Set the torque adjustment collar Figure 5.
The torque of the tremolo arm is adjusted with the torque adjustment cap Fig . 3.
Due to cup spring tolerances, the torque adjustment values can only be considered reference values.
Torque Adjustment ( Manufacturer-side ) The clutch is set to the torque stipulated in the order.
Consistent torque - no operator torque adjustment npT or Tri-clamp FiTTings lubricaTion boTTle.
LED work light There is a LED worklight ( 8 ) located under the torque adjustment collar 3.
Using a 2 mm hex wrench, rotate the Torque Adjustment Screw clockwise until the Screw stops.
The torque adjustment collar ( d ) may be set on any number.
Using a 2 mm hex wrench, turn the Torque Adjustment Screw clockwise until it stops.
The torque adjustment collar ( G ) is marked with numbers and a drill bit symbol.
To decrease the torque, turn the torque adjustment collar ( d ) clockwise.
Set the torque adjustment collar ( d ) to the desired setting.
There is a worklight ( 8 ) located under the torque adjustment collar 3.
Circling the torque adjustment collar ( d ) are numbers.
For screwdriving proceed as follows, Set the torque adjustment to position “ 1 ”.
Set the torque adjustment collar ( e ) to the drill symbol.
Table 2, References for torque adjustment page 8.
You'll also be interested in:
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
Examples of using Adjustment
Show more
Adjustment for accrued income from investments
The single flow adjustment knob allows
Adjustment for other accruals and liabilities
