Examples of 'torque measurement' in a sentence
Meaning of "torque measurement"
Torque measurement: This refers to the quantification or assessment of torque, which is a rotational force in physics and engineering
How to use "torque measurement" in a sentence
Basic
Advanced
torque measurement
Resetting error of the torque measurement sensor.
A static torque measurement is recommended for impact wrenches.
Measurement of the drift of the torque measurement equipment.
Separate torque measurement during the demonstration is not required.
For each engine its own torque measurement.
Wheel torque measurement.
The end of the test is determined by the torque measurement.
Torque with torque measurement flange only.
It also makes it possible to improve the sensitivity of the torque measurement device.
Zeroing of the torque measurement equipment.
Alternate tightening between the two fasteners until the torque measurement is achieved.
Viscometer using reaction torque measurement based on rotational phase difference.
Soil characterization at each pile location was done by standard penetration tests with torque measurement.
This version is automatically used if no torque measurement flange is programmed.
Temperature variations can modify product characteristics with a result of different torque measurement.
See also
Separate torque measurement during the inducement system demonstration is not required in this case.
The equipment used for the torque measurement is,.
Zeroing of the torque measurement equipment shall follow the instruction of the equipment maker.
The same oil fill may be used for run-in and torque measurement.
The rotating speed and the torque measurement are achieved on the shaft of the rotor.
Torque measurement system for measuring a torque developed by the power assembly ;.
The sensor may also be used for torque measurement in non-rotating shafts.
A static torque measurement is recommended for the Pulse Tool machines.
How many points are calibrated for torque wrenches with wide torque measurement ranges?
Reliable Torque Measurement on rotating shafts.
Combined with the measurement of the temperature during operation, the torque measurement can be compensated.
For the torque measurement system the maximum calibration may be limited to 10 kNm.
The off-axis force component Fz may result in an error in torque measurement.
Previously, torque measurement was accomplished using contact-type sensors directly attached to the shaft.
This second transverse plane P 2 forms the torque measurement plane.
The torque measurement is pre-calibrated through the design and dimensions of the instrument.
This movement is measured by the torque measurement system 13.
Torque measurement Load cell or in-line torque meter may be used for torque measurements.
Centrifugal acceleration in torque measurement - often underestimated, however, very effective.
Torque measurement system 6 is associated with the steering device 1.
Such an application for torque measurement is described in FIG . 1.
The torque measurement sequence shall be performed and recorded twice. ';.
FIG . 2a is a simplified view of the torque measurement components ;.
ROBA - DSM couplings are torque measurement systems based on flexible shaft misalignment compensation couplings.
Mark-10 Corporation is a designer and manufacturer of force and torque measurement products.
The torque measurement provided by the sensor 30 detects these modulations.
FIG . 8 is an extract of the torque measurement and travel speed recording for test No. 48.
The torque measurement on one of the cylinders is detected by the extensometry gauge ( 13 ).
This torque measurement is entered into a first comparator 101.
The torque measurement uncertainty shall be calculated and included as described under 3.3.9.
The torque measurement uncertainty shall be calculated and included as described in paragraph 4.4.7.
You'll also be interested in:
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
Examples of using Measurement
Show more
Market risk measurement and limits in trading
Systolic or diastolic pressure was outside the measurement
Airflow measurement and revision of test standards
