Examples of 'torque values' in a sentence
Meaning of "torque values"
torque values: This phrase refers to the measure of the rotational force or effectiveness in an object, often used in physics or engineering contexts
How to use "torque values" in a sentence
Basic
Advanced
torque values
The final torque values are very low.
Do not exceed the recommended torque values.
Reference torque values of each torque clutch stage.
The following are the recommended torque values.
Torque values shown are based on lubricated connections as in reassembly.
Tnorm are the normalized duty cycle torque values.
Use of these torque values is at your sole risk.
Conversion factors for torque values.
Torque values for hydraulic connectors.
Maximum tightening torque values are listed in the table below.
The viscosity measurements were performed at multiple percentage torque values.
The duty cycle torque values shall be normalized as follows.
See inside transfer switch enclosure for proper torque values.
These torque values are to be obtained with a calibrated torque wrench.
The above indicated tightening torque values have to be strictly respected.
See also
Torque values and angles shown are based on lubricated connection as in reassembly.
These values correspond to braking torque values as explained here above.
Lowest torque values and a perfectly stable flex point guarantee.
This confirms the results obtained from the torque values.
The torque values are lower when gelatin is processed at higher temperatures.
The turning force can not exceed low torque values.
Points with negative torque values have to be accounted for as zero work.
The arithmetic average of the two averaged torque values shall be taken.
Negative torque values represent torque during rotation in the first direction.
Physical specifications of the material is appropriate to provide intended torque values in world standards.
Torque wrench whose torque values can be adjusted easily and quickly.
The cable lugs must be fixed to the isolator switch with the following torque values.
Maximum torque values during the loading peak were recorded as a charge torque.
The reference data is a set of a plurality of rotating torque values f detected between peak positions.
The torque values in the table are based on the use of lubricated threads.
The thus determined flux magnitude and torque values are then compared with predetermined reference values.
All torque values included in these charts are approximate and are for reference only.
This reduces the risk of causing damage to the drive line X through excessive torque values.
Positive torque values represent torque during rotation in the second direction.
Refer to component User Manuals for torque values.
Implantation torque values were measured by screw types of four screws implanted in the joints.
Re-tighten all wiring terminal connections to specified torque values.
Comparisons of torque values were made for dampers formed having various material constructions.
Two springs are available, each one covering a range of torque values.
Use the recommended torque values and follow the proper tightening sequence.
The control values may preferably be force and / or torque values.
If the torque values exceed the upper range limit linear extrapolation shall be applied.
Tighten the thread connection respecting the maximum torque values in the table 1.
Random residual aligning torque values are anticipated when using the treads of these patents.
A set of pre-computed tables is used to store different torque values at different speeds.
Tighten all bolts to torque values specified in charts unless otherwise noted throughout this manual.
Unless otherwise noted, use the standard torque values provided in this manual.
A glance at the torque values makes one sense that the TSIs are very high torque.
The clamp screws were not checked to ensure the correct torque values had been reached ;.
The torque values and apparent coefficients of friction are again measured using torque tension testing.
You'll also be interested in:
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
Examples of using Values
Show more
The measured values shall be plotted on a graph
Date and time revert to default values
Carrying values and estimated fair values
