Examples of 'total cycle time' in a sentence
Meaning of "total cycle time"
total cycle time: This term refers to the overall duration required to complete a full cycle of a process, from start to finish
How to use "total cycle time" in a sentence
Basic
Advanced
total cycle time
Ratio of total handling time to total cycle time.
Total cycle time is the.
It will therefore be possible to reduce the total cycle time and thus improve productivity.
The total cycle time depends on the coil width.
This alternate sequence would save several seconds from the total cycle time.
Total cycle time was noted.
The cooling time will in fact influence the total cycle time of the process.
The total cycle time is about one to two hours.
For a repetitive cycle, the ratio of on time to total cycle time.
Determine the total cycle time to complete this turning operation.
This solution offers the further disadvantage of increasing the system 's total cycle time.
The total cycle time from tissue disruption to collection was under five minutes.
With all the control dipswitches off, the total cycle time will be four minutes long.
The total cycle time may be in the order of 5 secs.
Applying these can significantly reduce process steps, total cycle time and total costs per part.
See also
Hence, the total cycle time may be extended.
The retardation time ts is prolonged as much as the total cycle time T1 is prolonged.
The total cycle time is approximately 12 minutes.
The process of claim 5 wherein the total cycle time is less than 5 seconds.
Total cycle time between injections was 25 min.
How do we reduce the total cycle time for new product development?
Total cycle time is 1 second.
The duration is defined in percentage, in which 100 % represents the total cycle time.
The total cycle time is preferably 8s.
There are therefore three detection patterns for a given line, for a total cycle time of 1350 ms.
The total cycle time was 6 hours.
For a minimum practical evacuation time ( E ) of 40 seconds, this yields a minimum total cycle time of 60 seconds.
The total cycle time for the run was 40 minutes.
Approximate total cycle time is 15 minutes.
The total cycle time was kept at about 30 seconds or less.
Total cycle time was approximately 2 s.
The total cycle time for laying one brick is 11 seconds.
The total cycle time is relatively short, typically about 60 seconds.
Total cycle time to machine all 27 clamped parts is six hours.
The total cycle time is approximately 27 minutes without the extra rinse.
The total cycle time for all four phases is approximately 90 minutes.
The total cycle time is X4 seconds.
Total cycle time will be 45 seconds or less.
The total cycle time is thus 14 seconds.
Total cycle time was approximately 18 hours.
Total cycle time excluding imaging was around 9.3 minutes.
The total cycle time was approximately 32 seconds / part.
The total cycle time was 95 minutes.
The total cycle time for the run was 90 min.
The total cycle time for the batch sequence was 3.5 hours.
The total cycle time was 54 sec. and the injection pressure was 4 MPa.
When the total cycle time ( recharge + discharge ) is less than 1 second.
You'll also be interested in:
Examples of using Total
Show more
What you did was total and utter betrayal
Total separation between product and propellant
As percentage of total number of cleared cases of arrest
Examples of using Cycle
Show more
The cycle can be delayed up to nine hours
Press repeatedly to cycle through menu options
Cycle through different information display modes
Examples of using Time
Show more
Spent a lot of time with the ladies
Time and tide wait for no man
A woman needs time to think things over
