Examples of 'total porosity' in a sentence
Meaning of "total porosity"
total porosity - The overall measure of empty spaces or voids in a material, structure, or substance. It quantifies the degree to which a medium can hold or transmit fluids, air, or other substances through its porous network
How to use "total porosity" in a sentence
Basic
Advanced
total porosity
The total porosity was determined as previously noted.
Porosity is the argillites total porosity.
Total porosity is computed from the bulk density.
This open porosity is expressed as a percentage of the total porosity.
Total porosity involves both closed and open pores.
Its subtraction from the total porosity leads to the closed porosity value.
Total porosity may be defined as the volumetric ratio of void spaces in concrete.
The results were used to calculate the samples total porosity and pore size distribution.
The total porosity of each composite was determined in a standard manner.
They are remarkably high, considering the corresponding total porosity values.
The total porosity values vary significantly laterally and vertically.
The formed carbonates fill the pores, reducing the total porosity.
The term total porosity refers to the total volume of voids in a rock sample.
Consequently, the anion accessible porosity may be significantly lower than the total porosity.
The total porosity is the sum of the interconnecting porosity and the intergranular porosity.
See also
The compressive strength, mean interconnection diameter and total porosity were then evaluated for each foam.
The total porosity is measured using the mercury intrusion parameter method or equivalent methods.
Growing media should have a total porosity of 50.
Total porosity means the volume of the mesopores and the volume of the micropores.
Hence, in like manner to pore size, total porosity can vary widely.
The total porosity of argillites varies significantly both, laterally and in the vertical cross section.
By multiplying the two together the total porosity is determined in units of cm ³ / cm ³.
However, total porosity is not the only parameter important for characterizing the pore space.
These large pores account for 96 % of the pore volume of the total porosity.
Composition, compressive strength, total porosity and mean diameter of interconnection of the different foams prepared.
A moderate correlation ( correlation coefficient of 0.5 ) was used between the total porosity and hydraulic conductivity.
Total Porosity - includes open and closed pores or voids in the composite material.
Physical, texture, soil density, particle density and total porosity analysis were determined.
TABLE Χ, Total porosity measured with the texture analyser and calculated by density.
The cell as claimed in claim 1, said side block having a total porosity of less than 5 %.
The total porosity measured of the specimens was 2 %.
The ceramic article had a total porosity of 25 %.
The total porosity of the porous zone was estimated to be 60 % by image analysis.
High insulating materials have a total porosity of at least 45 %.
The total porosity measured is 2 % ( this value represents the open and closed porosity ).
The open porosity is 48 % of the total porosity of the composite.
The total porosity including the large voids ( conduits ) could attain 4Z.
In the deeper siltstone unit, the fracture porosity makes up only 0.5 % of the total porosity.
The total porosity measured on the sintered specimens was less than 0.5 %.
Normally this value is lower than 25 % and in particular lower than 15 % of the total porosity.
The resulting product has a total porosity of 97 % and the average pore radius is 15 microns.
Thus, the bone substitute of this example develops a total porosity comprised between 37 and 38 volume %.
Porosity, The total porosity of carriers is based on the sorption of a liquid ( 2-propanol ).
According to Andra, in the vertical cross section the total porosity ranges from 5 % to 23.
The zirconia aggregate particles have a total porosity of less than 5 vol. %, preferably less than 2 vol. %.
You'll also be interested in:
Examples of using Total
Show more
What you did was total and utter betrayal
Total separation between product and propellant
As percentage of total number of cleared cases of arrest
Examples of using Porosity
Show more
Porosity calculated from other measured parameters
It has very low porosity and permeability
Porosity could also skew crater counts
