Examples of 'traction forces' in a sentence
Meaning of "traction forces"
traction forces: In physics and engineering, traction forces refer to the forces generated between two surfaces in contact that resist their relative motion
How to use "traction forces" in a sentence
Basic
Advanced
traction forces
Quantifying cellular traction forces in three dimensions.
Traction forces will not be fully stimulated.
Suitable for high traction forces.
Traction forces are applied on these spots.
Load due to dynamic traction forces and compressive forces.
Traction forces will not be focused on one single point.
Use of micropatterned soft substrate for measuring of cell traction forces.
Avoid traction forces on the piston rod to present internal damages.
The model captures the spatial distribution of traction forces seen in experiments.
These traction forces impart good mechanical strength during centrifuging.
This makes it possible to balance the traction forces exerted by the link arm.
Braking and traction forces are transferred from the vehicle to the road through the footprint.
The clamping force required to sustain the traction forces are also very high.
Incremental increases in traction forces were applied as the patient responded positively to care.
This hydraulic linkup acts as a differential and balances out rope traction forces and rope travel.
See also
Current methods to measure cell traction forces rely on the deformation of soft substrates.
Generally, adhesives are better at withstanding shear forces than traction forces.
One such limitation is the traction forces between the ropes and the sheave.
Plus, the elasticity of the substrate is compatible with traction forces measurements.
Therefore not only axial traction forces but also torsion forces come into play.
During walking movements, the fascia is subjected to repeated traction forces with each step.
Additionally, traction forces affect the functionality of the veins.
This core must be able to withstand all traction forces which might occur.
Moreover, traction forces are assumed to be tangential to the plane of the substrate.
For this to occur, traction forces are needed.
The traction forces are borne both by the main carcass 2 and by the secondary carcass 6.
They withstand the bending, torsion and traction forces less well.
At the same time, the traction forces liquefied vitreous beneath the borders of the break.
Finally, under certain conditions of use, flat cables may be subjected to accidental traction forces.
Excessive compressive and / or traction forces may cause trauma to the fetus and possibly the mother.
Thus, the shear forces are removed, and only traction forces remain.
Figure 5A, Cell traction forces in response to blebbistatin calculated with method illustrated in figure 4F.
The force sensor 22 is able to measure both compressive and traction forces.
The layers 19 withstand the traction forces applied between the armoring 3 and 4 of cables 1 and 2.
Fig 1D, There is no non-adhesive edge to stimulate and position traction forces.
The component which forms a bearing 42 absorbs the traction forces applied to the rod 41.
You'll also be interested in:
Examples of using Traction
Show more
A loss of traction may cause a fall or tipover
The model has two traction tires
Set traction locks in the neutral position
Examples of using Forces
Show more
There are no external forces applied on the device
Forces nouvelles revenues from taxation of cocoa
The person who forces you is not me
