Examples of 'transmitter and the receiver' in a sentence
Meaning of "transmitter and the receiver"
transmitter and the receiver: This phrase is commonly used in the field of telecommunications and electronics to refer to the components that send and receive signals, messages, or data. It typically denotes devices or equipment involved in transmitting and receiving information wirelessly or through a network connection
How to use "transmitter and the receiver" in a sentence
Basic
Advanced
transmitter and the receiver
Once the transmitter and the receiver.
A large number of steel structures between the transmitter and the receiver.
Placing the transmitter and the receiver.
When there is a great distance between the transmitter and the receiver.
Move the transmitter and the receiver.
Several absorbing units are placed between the transmitter and the receiver.
Matching the transmitter and the receiver.
The following adjustment has to be made on both the transmitter and the receiver.
Clean the transmitter and the receiver regularly.
D is the distance between the transmitter and the receiver.
If the transmitter and the receiver are too far.
Match the group IDs of the transmitter and the receiver.
The transmitter and the receiver must start.
Check the batteries of the transmitter and the receiver.
Set the transmitter and the receiver to the same channel.
See also
Avoid obstacles between the transmitter and the receiver.
The transmitter and the receiver to turn the devices off.
Check whether the transmitter and the receiver.
The transmitter and the receiver tune in to equal frequency range.
Location of the transmitter and the receiver.
The transmitter and the receiver are implemented mostly in digital form.
Low battery alarm on both the transmitter and the receiver.
The transmitter and the receiver are to be placed facing each.
The distance between the transmitter and the receiver is too long.
The transmitter and the receiver are set to the same identification number.
Preferably the transmitter is an infrared transmitter and the receiver is an infrared receiver.
The transmitter and the receiver should be as close together as conveniently possible.
Close the battery compartment of the transmitter and the receiver again.
Switch the transmitter and the receiver off when not in use.
This requires spatial processing by both the transmitter and the receiver.
Disconnect the transmitter and the receiver battery.
Move the channel selector to a different position on the transmitter and the receiver.
Check whether the transmitter and the receiver are switched on.
This greatly simplifies the design of both the transmitter and the receiver.
It requires the transmitter and the receiver to have multiple antenna.
The same room code must be set on the transmitter and the receiver.
The transmitter and the receiver may naturally be transmitter and receiver terminals.
If the distance between the transmitter and the receiver is too long range.
The transmitter and the receiver may form part of a radio frequency transceiver.
Second way of synchronising is to make a connection between the transmitter and the receiver.
The view between the transmitter and the receiver must not be restricted.
Put the channel selector on the same number on the transmitter and the receiver.
Make sure that the transmitter and the receiver are both on the same.
Each spatial stream requires a discrete antenna at both the transmitter and the receiver.
Make certain that the transmitter and the receiver are using the same frequency.
The pseudorandom sequence must be the same for the transmitter and the receiver.
The distance between the transmitter and the receiver exceeds the range of action.
Transmitter and the receiver with a cloth lightly dampened with a mild cleaning solution.
We were back in business because the transmitter and the receiver had the same name.
The transmitter and the receiver are advantageously positioned inside the body of the component.
You'll also be interested in:
Examples of using Transmitter
Show more
Never operate the transmitter in places where it is
Transmitter with adhesive tape for affixing
Carefully place the transmitter on the antenna
Examples of using Receiver
Show more
Occupiers refuse receiver entry into shipyard
Receiver unit is outside the maximum range
Make sure that the receiver is turned on
