Examples of 'transmitting node' in a sentence
Meaning of "transmitting node"
Transmitting node: A device or point in a network that sends or forwards data to other nodes or devices in the network
How to use "transmitting node" in a sentence
Basic
Advanced
transmitting node
Transmitting node to reduce the rate of transmission.
The pieces of signaling information include an identifier of the transmitting node.
The transmitting node comprises processing circuitry.
Such a signal notably includes a unique identifier of the transmitting node on the network.
The transmitting node comprises radio circuitry and processing circuitry.
The parameters are associated with the background noise at the transmitting node side.
The transmitting node acknowledges receipt of the grant by transmitting a confirmation.
It consists of recording the constraints sent by the transmitting node neighboring the considered node.
The transmitting node is the one that initiates the communication.
The comfort noise should preferably mimic the background noise at the transmitting node.
Transmitting node wishes to broadcast information to the whole of nodes of the network.
The indicator may also include additional layout information or layout parameters of the transmitting node.
The transmitting node will be described in brief in order to avoid unnecessary repetition.
Transmitting data while respecting a maximum amount of unacknowledged data which the transmitting node may transmit.
The transmitting node and the receiving node are comprised in a wireless communications system.
See also
As shown for a transmitting node in Fig.
The transmitting node wipes out its own storage and starts over with a clean slate.
This message can also contain the identifier of the first transmitting node NA.
They allow the transmitting node to discover vital connectivity data about the path.
The method comprises receiving N hangover frames from a transmitting node.
The transmitting node transmits at least one interfering signal on the IMR as said interference.
Figure 10 is a block diagram illustrating a transmitting node according to some embodiments.
For example, a transmitting node may decide to initiate a re-try message at a lower data rate.
A system start is thus safeguarded in spite of the incorrectly transmitting node 2.
More generally, the transmitting node is associated with the cluster.
As discussed, the EHF provides a fast feedback to the transmitting node.
Otherwise, as discussed below, the transmitting node transmits the data in segments.
The transmitting node determines an interference measurement resource, IMR.
According to a first aspect, a method performed by a transmitting node or encoding node is provided.
In this case, the transmitting node may back-off and attempt a request at a later time.
Given this usage, a receiving node may transmit a status PDU to the transmitting node.
The feedback information provided back to the transmitting node may include channel quality indicators ( CQIs ).
The transmitting node uses the BACK to determine which data packets, if any, require retransmission.
In an LTE context, this transmitting node may be the eNodeB.
A transmitting node and a receiving node are set individually for each terminal 300.
If the feedback is a NACK, the transmitting node retransmits the data.
A transmission retry manager 120 may govern aspects of transmission retries on a transmitting node.
Likewise, a transmitting node may receive a status PDU.
The transmission points may in some embodiments be controlled by the transmitting node 560.
In this case, the transmitting node may specify a longer TXOP.
The selection of composition of transmission points may be made by the transmitting node 560.
If there is no collision, then the transmitting node 60 may complete its transmission unaffected.
The frame body 404 serves to provide detailed information about the transmitting node.
For this purpose, the transmitting node 10 preferably includes its node identifier in the message.
The exemplifying method illustrated in figure 8 comprises receiving 801 N hangover frames from a transmitting node.
In this case the transmitting node 10 is a CDMA base station.
RTS and CTS contain the position of the transmitting node 20a.
Use the transmitting node T shown in FIG . 1 as an example.
In step S 13, the SNR / SINR or rate is reported to the transmitting node in a response message.
The transmitting node 132 may be a fixed or a mobile node.
You'll also be interested in:
Examples of using Transmitting
Show more
Transmitting distance of remote control is very short
There is no danger of transmitting the virus unless
Transmitting or making restricted material available to a minor
Examples of using Node
Show more
The node is included in the protection scope
The inactive mesh node is highlighted in gray
Node name nodename part of uname output
