Examples of 'treatment temperature' in a sentence
Meaning of "treatment temperature"
Treatment temperature: Refers to the specific temperature at which a treatment or process is carried out to achieve a desired outcome, often used in medical or scientific contexts.~
How to use "treatment temperature" in a sentence
Basic
Advanced
treatment temperature
The overaging treatment temperature was also varied.
These samples are heated to the desired treatment temperature.
The treatment temperature is usually around room temperature.
Colour of wood depends from treatment temperature.
A preferable treatment temperature is room temperature.
Their hardness can be controlled by varying the heat treatment temperature.
Time at solution heat treatment temperature has an effect.
Treatment temperature in laboratory could be as low as room temperature.
The loss depends on the treatment temperature and time.
A higher treatment temperature resulted in a thicker surface layer.
It is thus instantaneously passed from the thermal treatment temperature to the room temperature.
The treatment temperature and duration have to be selected carefully.
The commodity must reach the treatment temperature before treatment commences.
The treatment temperature and duration depend on the alloy in question.
The type of phase occurring is dependent on the method of preparation and treatment temperature.
See also
The preferred treatment temperature and time are inversely related.
The radial crushing strength has increased with increasing heat treatment temperature.
Is the treatment temperature.
The yield strength obtainable by aging decreases as time at solution heat treatment temperature increases.
The heat treatment temperature can be lowered when pressure is applied.
It is a requirement that the commodity must reach the treatment temperature before treatment commences.
The heat treatment temperature has little influence on the results obtained.
The length of contacting step d is determined by the treatment temperature applied during said contacting.
The treatment temperature will depend on the stage of applying the treatment.
Besides reaction temperature the effect of heat treatment temperature of the silica substrate was studied.
The treatment temperature primarily depends on the temperature of decomposition of the precursor.
There is a direct relationship between the final treatment temperature and the system operating pressure.
The treatment temperature is maintained by adjusting the flow rate of the water.
The water vapour pressure in the container is predetermined for the heat treatment temperature contemplated.
The reactivation treatment temperature varies depending upon the catalyst to be treated.
The time requirement for any particular desired result will vary with the treatment temperature.
Sampling at each heat treatment temperature was done by using the iosipescu shear test coupon.
The number of OH groups created depends on the water vapour treatment temperature.
The treatment temperature may thus vary depending on the nature of the load.
The chamber in which the container is placed is heated to the APVS treatment temperature.
It is not necessary that the treatment temperature be held constant during the treatment.
Advantageously, this treatment is commensurately longer as the treatment temperature is lower.
To some extent the treatment temperature is dependent on the origin of the lipid material.
Preferably, the heating time is adjusted as a function of the treatment temperature.
The treatment temperature is the temperature at which the additive is added to the slurry.
Pre-cooling of the commodity to treatment temperature is required.
The heat treatment temperature can be lowered by performing the treatment under low pressure.
For other suitable materials, the treatment temperature range may be different.
A higher treatment temperature can be used when complex fluoride is present in the treatment solution.
In a similar way, the particle dimensions are directly related to the treatment temperature.
The therapeutic treatment temperature is reached faster than treating with either modality alone.
Third, carbon fibers can be classified based on the final heat treatment temperature.
The treatment temperature can be raised and thicker layers of fluoride complex can be produced.
Figure 5 shows the effect of heat treatment temperature on the distribution of open pores.
The treatment temperature is related to the hemi-cellulose content of the heated material.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Treatment
Show more
Helps in the early treatment of viral infections
Treatment of and procedures for recognizing refugees
People starting treatment in the reporting year
