Examples of 'trimmer head' in a sentence
Meaning of "trimmer head"
A trimmer head refers to the part of a gardening tool, such as a string trimmer or brush cutter, that holds the cutting line. It is the rotating component that trims or cuts grass, weeds, or other vegetation
How to use "trimmer head" in a sentence
Basic
Advanced
trimmer head
A trimmer head is intended for trimming grass.
Make sure the trimmer head is free of.
Trimmer head will not advance line.
Installing reel easy line trimmer head.
Press the trimmer head adjustment button.
Remove currently installed line trimmer head.
Move the trimmer head to one of four.
Iinstalling pro cut ii line trimmer head.
Move trimmer head up or down to desired position.
Never lean over the trimmer head.
Trimmer head cover not seated properly.
With openings in the line trimmer head.
Remove the trimmer head by turning clockwise.
The cutting element of the trimmer head is dirty.
Keep trimmer head as close to ground as practical.
See also
To adjust the trimmer head angle.
Trimmer head should stop within a few seconds.
Do not lift the trimmer head when trimming.
A trimmer head or plastic blade is used.
Handle controls trimmer head rotation.
A trimmer head or plastic blades are used.
We stock and produce trimmer head in big quantity.
Installing line in reel easy line trimmer head.
Screw the trimmer head onto the shaft.
Grass trimming with a trimmer head.
Bump the trimmer head lightly on the ground.
Grass wound between shaft and trimmer head.
Attaching the trimmer head to telescopic tube assembly.
Avoid contact with the rotating trimmer head.
Place the trimmer head on the drive connector.
Fitting the trimmer guard and trimmer head.
Make sure the trimmer head is securely fastened.
Adjusting the hedge trimmer head.
Keep the trimmer head below waist level.
Aligns with arrows on top of line trimmer head.
Always tap the trimmer head on a grassy area.
Avoid hitting small objects with trimmer head.
Replace the trimmer head if necessary.
Only use the original string trimmer head.
The motor shaft or trimmer head is bound with grass.
The trimmer head can be adjusted to three different positions.
Make sure the line trimmer head is fully seated.
Place the grass deflector onto the trimmer head.
Avoid forcing the trimmer head against hard surfaces.
To attach the handle module to the trimmer head module.
Place the line trimmer head on the drive shaft.
Remove the blade before attaching the trimmer head.
Hold the trimmer head just above the ground.
Follow these steps to install the trimmer head assembly.
Tab and move trimmer head up or down to desired position.
