Examples of 'trouble codes' in a sentence
Meaning of "trouble codes"
trouble codes - alphanumeric codes generated by electronic control units in vehicles to indicate faults or problems
How to use "trouble codes" in a sentence
Basic
Advanced
trouble codes
All trouble codes read out are indicated.
Especially the ability to read trouble codes.
Intermittent trouble codes may or may not be stored.
Here is how to get the trouble codes.
All diagnostic trouble codes should now be cleared.
You need to check for trouble codes.
Trouble codes should automatically clear.
Check for trouble codes again.
Trouble codes indicate problems found by the computer.
Proceed as follows to read out the trouble codes.
This will not reset trouble codes in the computer.
Checking the vehicle computer for car trouble codes.
Clear any diagnostic trouble codes with a code reader.
Your car outputs two types of trouble codes.
Then delete the saved trouble codes from the vehicle system.
See also
Further information on malfunction can be obtained by reading diagnostic trouble codes.
Repeat this step until all trouble codes have been read.
None of the vehicles presented prompt or pending diagnostic trouble codes.
Do not erase the trouble codes before establishing whether repair is necessary.
The engine must not be running when erasing the trouble codes.
Not all trouble codes can be automatically erased using the scan tool.
You can also view a list of common transmission diagnostic trouble codes.
Check your manual for a list of trouble codes and what they mean.
Erase trouble codes and carry out road test to ensure fault has been rectified.
It is not sufficient to just erase the trouble codes and reset the warning light.
Anything which interferes with the wheel sensor can create intermittent problems or set trouble codes.
The number of trouble codes in the prevailing ECU memory is indicated.
Requirements for erasing Diagnostic trouble codes DTCs.
Trouble codes were not Trouble codes are not included.
Trouble code structure i The structure of the trouble codes is shown in the following table.
OBD trouble codes are complex because there are thousands of different ones.
ScanGauge provides a method to force clear any detected or undetected Trouble Codes.
No trouble codes stored in ECU memories.
You must complete all of step 3 in order to erase trouble codes.
No trouble codes saved in ECU memory.
Either way, you will probably want to clear the trouble codes.
One or more trouble codes is / are displayed.
Vehicles not listed may be tested for engine / transmission trouble codes only.
All the trouble codes are now erased from computer memory!
Have you been able to check for trouble codes in the system?
Trouble codes can not be cleared until they have been read!
Some problems can be diagnosed visually, while others require a diagnostic scan for trouble codes.
Read diagnose trouble codes, clear trouble codes and detect fuel pressure and so on.
The ABS computer can store up to 7 trouble codes.
Trouble codes are erased when the anti-lock and brake lights turn on, then turn off.
Request the emission-related diagnostic trouble codes detected during current or last completed driving cycle.
Codes Reading, erasing and resetting of stored vehicle trouble codes.
R Erasing of trouble codes in electronic control unit press and hold for 3 seconds.
Press the ERASE button for a further 3 seconds to erase trouble codes.
OBD trouble codes feature five characters, one letter, followed by four numbers.
You'll also be interested in:
Examples of using Codes
Show more
Subject codes assigned to the notices to skippers
Observe all local codes and ordinances
Codes of technologies used and level of development
Examples of using Trouble
Show more
We are gonna be in more trouble than we have ever been in
Trouble shooting for aurora paper shredders
I never had such trouble fitting anybody
