Examples of 'truss rod' in a sentence
Meaning of "truss rod"
Truss rod: A metal bar or rod used in the construction of guitars or other string instruments to adjust the curvature of the neck for better playability and sound quality
Show more definitions
- A steel rod that stabilises the neck of a guitar
How to use "truss rod" in a sentence
Basic
Advanced
truss rod
Truss rod should be adjustable on the guitar.
Double action truss rod tightens both ways.
Truss rod works just as it should.
He also adjusted the truss rod.
Truss rod needs to be checked.
To loosen the truss rod.
The truss rod nut is located at the headstock end of the neck.
This lead us to redesign our classical guitars to use a truss rod.
A truss rod is built into the neck to adjust for action if needed.
This lead us to re design our classical guitars to use a truss rod.
Some models put the name on the truss rod cover instead of the headstock end.
I think the only plastic on it was on the truss rod cover.
Truss Rod difficult to adjust.
Here I show a complex repair when a truss rod needs to be replaced.
Does the truss rod harm the sound of the instrument?
See also
If not, you can easily break the truss rod nut.
Adjust the truss rod for proper neck alignment, if needed.
Laminated maple neck for strength - adjustable truss rod for perfect alignment.
Usually, the truss rod of a brand-new instrument is adjusted by the manufacturer before sale.
The fingerboard, pickup, bridge foot and truss rod cover are naturally finished.
BiFlex " truss rod adjustment on the headstock.
For this reason, the neck contains an internal truss rod that allows the curvature.
Rod . Truss rod tension can be measured by installing a capo at the first fret, holding.
Gibson & Epiphone guitars have their truss rod bolt covered with a signature bell-shaped plate.
The very first Hi-Fliers had a three-tone sunburst finish, pearloid white pickguard and truss rod cover.
Truss rod tension . ( We recommend only qualified tech - nicians perform truss rod adjustments . ) Ibanez basses.
I'd be in for one new truss rod cover.
Truss rod = = = The truss rod is a metal rod that runs along the inside of the neck.
Carved, solid mahogany, low profile neck with adjustable truss rod & dovetail neck joint.
Truss rod cover Bell LP style 2 ply.
The " seven " inlays were removed, and is now written on the Truss rod cover.
Look at the truss rod cover, it has 3 screws.
The MIK ( Made in Korea ) guitars can be differentiated by the truss rod cover.
Two-way truss rod.
Truss rod adjustment at the heel of the neck . 2 vintage style string trees . 21 medium frets.
A truss rod adjustment ( Fig . 3 ) is made to alter the curve or bow of the neck.
You'll also be interested in:
Examples of using Truss
Show more
Truss head screw or flush surface screw
Dissipative concentric truss bracings are subdivided in
The truss used a steel bottom chord
Examples of using Rod
Show more
A guide rod is in place to ensure correct positioning
Do not touch the rod during operation
My rod and my staff shall discomfit thee
