Examples of 'tube must' in a sentence
Meaning of "tube must"
This phrase is not a commonly used English expression. Without further context, it is difficult to determine its meaning or usage
How to use "tube must" in a sentence
Basic
Advanced
tube must
The telescopic tube must be tightly locked.
Tube must fit perfectly on the connection element.
The insertion tube must have malfunctioned.
Tube must be utilized.
The choice of conical tube must be adapted to the pestle.
The tube must be sealed after removing a tablet.
The transfer tube must be.
Chest tube must have clotted off.
The carrying capacity of the distance tube must never be exceeded.
The tube must be of an adequate length.
The entire length of the tube must have a steady fall.
The tube must be hermetically sealed.
The entire length of the tube must have a continuous fall.
The tube must also be compressed.
This means that the phase tube must intersect itself.
See also
The tube must be assembled to the housing before use.
The performance of the tube must be reproducible and reliable.
The tube must be wiped dry to prevent a buildup of slime.
The material used for the tube must therefore carefully be chosen.
Blow tube must be assembled to theblow clamshell before use.
The end of the extension tube must not touch the filter paper.
The tube must be adequately insulated to reduce heat losses.
The diameter of the exhaust tube must be equal to that of the outlet flange.
The tube must function linearly even at a high output power.
After each trial the fragments of the tube must be collected and weighed.
The drum tube must then easily turn by hand.
Damage to property The capillary tube must not be kinked.
The end of the tube must be positioned above a drain.
Jamming of particles inside the loading tube must be avoided ;.
The tube must be superconductive.
The plunger and the inside of the enclosing tube must be completely dry before assembly.
The tube must be free from water after cleaning.
For this reason the discharge tube must run higher than the upstream level.
Such tube must match with a corresponding strip as mentioned above.
First, the telescope tube must be mounted.
The drain tube must be vented at the back of the cabinet.
To obtain a proper reading, the tube must be completely filled.
The chimney tube must never pass across a combustible surface.
Do not overtighten hardware, hamper mount tube must be able to pivot freely.
The small tube must first be filled with water.
If there is a chain tube around the chain, the tube must be shortened.
The blower tube must be correctly installed for the blower to operate.
To prevent this, the tube must be kept warm.
The tube must only be handled using the special rubber grip.
Correct piping, dip tube must be in cold inlet.
This tube must be kept free and clear of obstructions and debris.
If necessary, a corrugated tube must be used for protection.
The air tube must however remain connected to the air compressor.
The size of tire and inner tube must meet with specifications!
The flue tube must be connected to the fireplace in accordance with official regulations.
