Examples of 'tube plate' in a sentence
Meaning of "tube plate"
The phrase 'tube plate' is most commonly used in the context of engineering or manufacturing, specifically in relation to heat exchangers or boilers. It refers to a component, usually made of metal, that separates and supports the tubes in a tube bundle or heat exchange system. The tube plate acts as a barrier or boundary between the fluid flowing inside the tubes and the surrounding environment, ensuring proper heat transfer and structural integrity
How to use "tube plate" in a sentence
Basic
Advanced
tube plate
Device for observing the tube plate of a steam generator.
Not presenting increased risks of erosion of the tube plate.
Inspection device for the tube plate of a heat exchanger.
The outlet tube may also be defined by an outlet tube plate.
The outlet face of the tube plate is covered by a stainless casing.
Device for use as a chemical reactor or heat exchanger with a tube plate.
Heat exchanger on the tube plate in an equilateral triangle or square arrangement.
The ends of these tubes are fastened in a tube plate of great thickness.
The lower part and tube plate of the exchanger are composed of refractory material.
The invention relates to an inspection device for the tube plate of a heat exchanger.
The perforated lower tube plate may be supported by a bed of inert beads.
The plug is then in place inside the passage hole in the tube plate.
The tubes may be secured in the tube plate by any known means.
The outlet tube plate may be structurally similar to the inlet tube plate.
The air is heated by flowing around the combustion chamber and its tube plate.
See also
A horizontal tube plate tightly fixed to an interior of said outer envelope ;.
Device for fixing a perforated sheet against the perforated tube plate of a heat exchanger.
A horizontal tube plate tightly fixed to the interior of the outer envelope ;.
Heat exchanger whose hot end has a device for protecting the tube plate.
In particular, the outlet tube plate may be formed to include a channel and flanges.
The part of the steam generator located below the tube plate forms a water box.
Especially, when the tube plate was damaged by corrosion, no repairing method could be applied.
Method and device for unclogging the top surface of the tube plate of a steam generator.
Above tube plate 8 there is an outlet collector 9 for the same heat transfer fluid.
The same applies to the welding zones between the tube plate and the partition plate.
This known heat exchanger comprises a baffle sealingly interposed between a cover member and a tube plate.
Fig . 6 is an enlarged view of the intermediate tube plate and the vicinity thereof.
Device used as a chemical reactor or heat exchanger in general, with a thin tube plate.
Within the vessel, a tube plate serves as a mount for a generally upright hollow chamber element.
The condensate flows down onto the lower tube plate 5.
Said tube plate is connected to ground through another conductor 44.
Preferably, the locking is constituted by the edge of the tube plate.
Now, the temperature gradient through the intermediate tube plate and the insulation plates is considered.
The heat medium draw line is preferably provided at least above a tube plate 5a.
FIG . 4 is a partial side view showing the tube plate in accordance with the invention.
The heat medium discharging tube 8b is provided at least above the upper tube plate 5a.
The tube plate 18 is formed from a sheet metal blank.
The intermediate connection device 35 permits better guidance of the inspection device inside the tube plate.
Dissolving corrosion products deposited on the tube plate The solution contains,.
The Delivery Water Heaters represent a vertical shelland-tube apparatus with a floating tube plate.
A tube plate 2 and cooling tubes 3 were tube-expanded and sealwelded.
The heat exchanger 2 has a lower tube plate 4.
That is, the top face of the tube plate 33 serves as the condensation part.
Fig . 6 shows an enlarged view of the intermediate tube plate.
The tube plate and bottom, which form their walls, must be very thick.
A distributor 5 is mounted on the lower side of the tube plate 4.
These tubes 8 form a bundle above the tube plate 2, whose cross-section is substantially circular.
The feed tubes 5 may also be fastened to the perforated lower tube plate 4.
This is a tube plate having only holes for the absorbent pencils to pass through ( FIG . 4 ).
The amount of ammonia supplied to the bottom tube plate was 12 kg / h.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Tube
Show more
The telescopic tube must be tightly locked
Tube him while you have an airway
Replace with a new tube connecting piece
