Examples of 'turbidimeter' in a sentence
Meaning of "turbidimeter"
Turbidimeter is a scientific instrument used to measure the degree of turbidity, or cloudiness, in a liquid sample, usually water. It is commonly used in environmental monitoring, wastewater treatment, and research settings
Show more definitions
- An optical instrument that measures the turbidity of a fluid containing suspended particles.
How to use "turbidimeter" in a sentence
Basic
Advanced
turbidimeter
Turbidimeter for nephelometric turbidity measurements.
In some instances a turbidimeter can be used.
The amount of clay in suspension was then determined in a turbidimeter.
An on line turbidimeter was connected to the pilot plant effluent.
Turbidity of the filtrate is measured with a suitable turbidimeter.
Place a turbidimeter into the sample of water you are analyzing.
In one embodiment turbidity can be observed by eye or using a turbidimeter.
The turbidimeter emits no signal below this threshold value.
The turbidity of the amino acid solution is measured by the turbidimeter and recorded.
Nephelometric turbidimeter vial arrangement.
The particle concentration in the outgoing fluid is measured using a turbidimeter installed at the outlet.
Building an unconventional turbidimeter to measure very large particles in motion in water.
Thus the described method may follow the glyoxalation reaction with a turbidimeter or a viscometer.
A special measurement by turbidimeter is used to assess the overall quality of the microbubbles.
The settlement rate of the solids was measured and the supernatant clarity determined by turbidimeter.
See also
A dry sample curvette of the turbidimeter is completely filled by the test sample.
The supernatant turbidity was measured using a Hach turbidimeter.
The portable turbidimeter uses the nephelometric principle for measuring turbidity.
The turbidity of the urate oxidase solutions is determined by a Ratio Hach turbidimeter.
A nephelometric turbidimeter and method for controlling the humidity of venting air in a nephelometric turbidimeter.
The mixtures were poured into a glass cuvette which was placed in the Turbidimeter.
The difference between results from ABBs turbidimeter and laboratory results was statistically significant.
The mixtures were sprayed into a glass cuvette which was placed in the Turbidimeter.
A nephelometric turbidimeter always monitors light reflected off the particles and not attenuation due to cloudiness.
The turbidity values were determined using a Hach Turbidimeter.
The results from Optosevens turbidimeter did not differ statistically significantly from the laboratory results.
The solution in the vial is then read directly in the Hach Ratio Turbidimeter.
Any standard turbidimeter will provide equivalent NTU measurements.
The turbidity of the solution was measured with a Hach Ratio Nephelometric Turbidimeter.
Turbidity by Turbidimeter.
If needed, a turbidimeter and a densimeter can also be used.
To quantify the amount of haze in a beverage, a turbidimeter is often used.
A response is observed on the turbidimeter from approximately 60 ppm glycerin present in the ester stream.
During stability testing, the aqueous phase without particles is measured visually or by the turbidimeter.
The lower detection limit of a turbidimeter is determined by the so called “ stray light ”.
Locally, even before the appearance of a glycerin droplet, an oversaturation detectable with the turbidimeter occurs.
The samples were examined for turbidity with a turbidimeter using 5 ml of the respective samples.
Turbidity is measured in nephelometric turbidity units, or NTU, using a device called a turbidimeter.
To quantify the amount of haze in a beverage, a turbidimeter also called hazemeter is often used.
For the ratio turbidimeter range, the microprocessor of the instrument calculates the NTU value, from.
Filtrate quality is assessed by measuring clarity, in NTU with a Hach turbidimeter.
As a non-limiting example, a turbidimeter can be used.
The formation of LAMP reaction products was monitored using a Loopamp real-time turbidimeter.
A Hach 2100AN turbidimeter connected to a strip chart was used to detect solution turbidity.
The measurement is taken on a Ratio / XR Hach turbidimeter.
Turbidimeter T is arranged at the outlet of the reactor ( s ).
The filtrate turbidity was measured using a Hach Ratio ® XR turbidimeter.
The clarity or haze is determined using a HACH Turbidimeter model 2100A or equivalent instrument.
Each was then used to overfill the calibration cylinder in a Hach Surface Scatter 6 Turbidimeter SS6.
The HI98713 Portable Turbidimeter is designed to meet or exceed the criteria specified by the.
