Examples of 'turn ignition' in a sentence
Meaning of "turn ignition"
turn ignition: This phrase is typically used in relation to starting a vehicle by turning the ignition key or button
How to use "turn ignition" in a sentence
Basic
Advanced
turn ignition
Turn ignition key to the left to unlock.
Within three seconds, turn ignition on again.
Turn ignition key until engine starts.
With engine running, turn ignition key counterclockwise.
Turn ignition key to ignition position.
Once the operation is completed, turn ignition off.
Turn ignition key to ignite car.
Once the appropriate sensitivity level has been selected, turn ignition off.
Turn ignition key on but do not start engine.
Before the dashboard LED extinguishes, turn ignition off and then on again.
Turn ignition off before making cable connections.
To test alarm, set switch to OFF and turn ignition key to RUN.
Turn ignition off before making any vehicle connections.
If the system is armed, turn ignition on and press push-button.
Turn ignition to the on position with a valid programmed SecuriLock.
See also
Remark 2, in the event of a mistake, turn ignition off to quit without making any changes.
Turn ignition on.
Apply the parking brake, turn ignition key to off, then remove the key.
Turn ignition key to Stop to put the machine out of.
While the security system is disarmed, turn ignition on, press and hold down push-button.
Turn ignition key to the RUN position to activate controller.
Note, If the stove will not light, turn ignition knob to the OFF position.
Turn ignition switch to the ON position.
Start vehicle, or turn ignition to “ accessory ” position.
Turn ignition switch to ON.
Start machine / turn ignition key 6.
Turn ignition on / off and start the engine.
If engine does not start, turn ignition switch off, wait 30 seconds, and try again.
Turn ignition knob counter-clockwise until you hear a click.
Charging indicator lamp and oil pressure indicator lamp light . - Turn ignition key to « 0 » and remove.
Open the door, turn ignition on and press the brake pedal.
Turn ignition on again and follow the same procedure to select the 3 remaining numbers.
With engine running, turn ignition key counterclockwise to ROS " ON " position.
Always turn ignition key OFF when connecting or disconnecting electrical components, unless otherwise instructed.
To test, turn ignition key to RUN and press switch.
Turn ignition on and press push-button.
Turn ignition key to “ START ” position for a few seconds.
Turn ignition key to “ START ” position for a few seconds to distribute oil.
Turn ignition to 1 ( LOCK ) and remove the first coded key from the ignition.
Turn ignition switch (H) to START position and release as soon as engine starts.
Turn ignition key off and wait 10 seconds.
Turn ignition to the " accessory " position.
Turn ignition on and wait 20 seconds.
Turn ignition key to “ STOP ” and remove key.
Turn ignition key « II » ; as soon as the engine starts, release the ignition key.
Turn ignition key to " OFF " position.
Turn ignition switch (T) to START position.
You'll also be interested in:
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
Examples of using Ignition
Show more
Vi potential ignition sources including electrical equipment
Do not expose the fluid to an ignition source
Do not touch ignition key while running
