Examples of 'turn off the power supply' in a sentence
Meaning of "turn off the power supply"
turn off the power supply: Instruction to switch off the source of electricity or energy
How to use "turn off the power supply" in a sentence
Basic
Advanced
turn off the power supply
Turn off the power supply circuit breaker.
Unplug the unit or turn off the power supply before.
Turn off the power supply and unplug.
Please switch off this main switch to turn off the power supply.
Turn off the power supply if the unit is.
Detach the power cable from the receptacle or turn off the power supply circuit breaker.
Turn off the power supply that needs to be replaced.
Detach the power cable from the receptacle and turn off the power supply circuit breaker.
You can turn off the power supply you.
Press the USB power supply switch again to turn off the power supply.
Do not turn off the power supply to the processor itself.
ELECTRICAL CONNECTIONS Before electrical connections are made turn off the power supply first.
Turn off the power supply when the filter is changed.
If the oven is working properly, turn off the power supply to.
Turn off the power supply and eliminate the cause.
See also
In the event of a product fault or malfunction, turn off the power supply switch.
Turn off the power supply before performing any maintenance.
If the oven light fails, turn off the power supply before changing the bulb.
Turn off the power supply and call authorized distributor.
If the oven light fails, turn off the power supply before you change the bulb.
Turn off the power supply before performing any operations.
ATX power supplies support the soft-off feature, allowing software to turn off the power supply.
Do not turn off the power supply during this operation.
At this point, the microprocessor will proceed to a step 134 and turn off the power supply.
And then turn off the power supply at the back.
Turn off the power supply and connect it to the device to be powered.
Any maintenance, turn off the power supply and remove the plug.
Turn off the power supply of hydraulic station after the operation.
To reset, simply turn off the power supply to the fan motor and re-start.
Turn off the power supply before removing or inserting the memory card.
After 1020 seconds turn off the power supply record the last amperage value and the time.
Turn off the power supply to the heater and remove the cover.
To replace the fuses, turn off the power supply see chapter Troubleshooting > page 11.
Turn off the power supply before making any adjustments to the demolition hammer.
Do not turn off the power supply whilst the deletion is ongoing.
Turn off the power supply for all com po nents before making any connections.
Remember to turn off the power supply before checking the dip switch settings.
Turn off the power supply of the system unit;.
If this occurs, turn off the power supply and remove the source of the problem.
Only turn off the power supply if the area around the fuse box is dry.
Turn off the power supply before any maintenance, repairs, or cleaning is undertaken.
Turn off the power supply after checking drainage, and remove the power supply wiring.
Important, Turn off the power supply to your circuit before measuring resistance.
Important, Turn off the power supply to your circuit before doing a continuity check.
Turn off the power supply to the VC420A and switch back on after 5 seconds.
You'll also be interested in:
Examples of using Supply
Show more
An extra air supply opening is definitely required if
Type designation of the power supply unit
Disconnect electrical supply if further adjustments are needed
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
