Examples of 'turn on water' in a sentence
Meaning of "turn on water"
To 'turn on water' means to open a water faucet or valve so that water starts flowing from a tap or a pipe. It is a common phrase used when someone wants to activate the water supply in a building or a specific area
How to use "turn on water" in a sentence
Basic
Advanced
turn on water
Turn on water faucets to check for leaks.
Check and turn on water supply.
Turn on water and check for leaks.
Open all faucets and turn on water supply.
Turn on water supply and check operation of humidifier.
Open each faucets and turn on water supply.
Turn on water supply to the unit.
Start engine and immediately turn on water supply.
Turn on water supply and start pressure washer.
Reconnect spray wand to gun and turn on water supply.
Turn on water and make sure.
Reconnect water source to pump inlet and turn on water source.
Turn on water and check that there are no leaks.
Connect high pressure outlet hose and turn on water supply.
Turn on water supply valve and check for leaks.
See also
Connect tubing to frame with water tubing clamp and turn on water supply.
Turn on water supply and check for leaks at fi tting.
Inlet tap turned off Turn on water inlet tap.
Turn on water supply slowly to allow filter to fill with water.
Water supply pressure low Turn on water supply tap fully.
Turn on water supply and check for leaks at the fitting.
Pressure fluctuates or drops Lack of water Turn on water supply.
Turn on water faucets to insure water flows from both faucets.
Pressure fl uctuates or drops Lack of water Turn on water supply.
Turn on water and open faucet to flush air from the system.
After installation of water line, turn on water and.
Turn on water supply and plug in power cord to check operation of humidifier.
Connect water supply to the garden hose, and turn on water supply.
Turn on water faucets to check for leaks from faucet and at washer connection.
Place paper towel under elbow . Turn on water supply and check for leaks.
Turn on water and purge water through the water heater and system.
Take off clothes, get in shower, turn on water.
Turn on water to RO system at cold water supply.
Connect tubing to frame with water tubing clamp ( C ) and turn on water supply.
Do Not turn on water heater unless it isfilled with water.
Connect tubing to frame with water tubing clamp ( F ) and turn on water supply.
Do Not turn on water heater unless it is filled with water.
Treat youself to a turn on water!!
N Turn on water supply To vent the system.
Once storage tank is full, turn on icemaker.17 Turn on water supply.
Slowly turn on water to prevent back - splash if vacuum system is clogged.
Pour water onto top of cartridge ( Fig . 1 ) and turn on water.
Install cassette, turn on water supply and check for leaks.
Turn on water supply and check for leaks and correct, if present.
Do Not turn on water heater if cold water supply shut-off valve is closed.
Do Not turn on water heater if cold water supply shut-off valve isclosed.
Turn on water & check for leaks.
You'll also be interested in:
Examples of using Water
Show more
There is no water damage or fire extinguisher residue
Do not clean the engine with water
Water freezing in the system will break it
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
