Examples of 'turn the blade' in a sentence
Meaning of "turn the blade"
Turn the blade is a phrase that is often used metaphorically to mean to change or shift one's approach or strategy towards a particular problem or situation. It implies making a decisive or significant change in order to achieve a desired outcome
How to use "turn the blade" in a sentence
Basic
Advanced
turn the blade
Turn the blade bolt clockwise to loosen.
Use the other hand to turn the blade collar.
Turn the blade nut clockwise to remove.
Loosen the locking nut X and turn the blade tip back to its correct position.
Turn the blade at a right angle to the arm.
The handwheel A clockwise turn the blade upward lift.
Turn the blade tightening lever clockwise until it.
If vibration persists, turn the blade through.
Turn the blade clamp locking sleeve in a counter.
To switch off the blade rotation, turn the blade rotation.
Turn the blade slowly by hand to.
The palm upwards, you turn the blade and chop.
Turn the blade unit on the blender jar.
If the blade is worn, turn the blade so that a new edge is in the.
Turn the blade so the marked tooth is at the back.
See also
Using the wrench provided with the tool, turn the blade bolt counterclockwise.
Turn the blade at an angle from the wiper arm.
With the spindle-lock button firmly depressed, turn the blade screw clockwise to loosen it.
Turn the blade of the knife toward the plate.
K7B will finally turn the blade of fate in our favor.
Turn the blade holder over with blade guard attached.
Carefully remove the blade . You may have to turn the blade slightly.
Turn the blade shaft until one of the holes in the drive disc.
Carefully take out the blade . You may have to turn the blade slightly.
Turn the blade so that the drive shaft engages in the angle gear.
Palms up, you turn the blade and slash.
Turn the blade clamp locking sleeve in a counterclockwise direction and hold it in this position.
Using the 13 mm wrench supplied, turn the blade nut counterclockwise.
Turn the blade tightening lever clockwise until it hits against the protrusion on the frame.
To store or remove additional blades, turn the blade storage knob ( M ) counter clockwise to open.
Turn the blade tension knob clockwise until the blade has the desired amount of tension.
Using a 17 mm wrench, turn the blade nut counterclockwise.
Turn the blade holder locking sleeve in a clockwise direction until the saw blade drops out.
I mean, so it's throwing rocks everywhere. He didn't even turn the blade off.
Turn the blade assembly lock dial clockwise to UNLOCK the blade assembly holder.
To do this turn the blade cylinder by hand . Note.
Turn the blade support adjustment screw in direction B to lock the blade support in place.
Invert the cup and turn the Blade Assembly counter-clockwise to open.
Turn the blade 7 a little until it slides onto the holder.
With the motor running, turn the blade speed adjuster ( n ) to obtain the desired speed fig . 9.
Turn the blade counter-clockwise to push food through mill.
To do so, turn the blade to the desired position ;.
Turn the blade base counter-clockwise and remove it from the mug.
Turn the blade so a clean, undamaged edge points toward the front of the machine.
Turn the blade so a sharp 90 edge points toward the front of the machine and against.
Turn the blade on your sword and become the Battousai once again!
Turn the blade clamping screw ( n ) anticlockwise to remove.
Turn the blade tension knob ( 3 ) clockwise, raising the upper wheel to tighten the blade.
Turn the blade clamping screw (r) anti-clockwise to remove.
Turn the blade adjustment all the way down to the 2.5mm setting.
