Examples of 'turn the meter' in a sentence
Meaning of "turn the meter"
Turn the meter: To adjust or control a measuring device, typically to regulate usage or consumption
How to use "turn the meter" in a sentence
Basic
Advanced
turn the meter
Press and release to turn the meter on.
Turn the meter off and remove the batteries.
You did not even turn the meter on.
Turn the meter off before removing the battery.
Press the button to turn the meter back on.
Turn the meter off and remove the test strip.
Next time turn the meter on.
Turn the meter off and remove all test leads.
This will turn the meter on.
Turn the meter off again when the settings are correctly entered.
Turn the function switch to turn the meter on.
Be sure to turn the meter off after use.
Pull and hold the trigger to turn the meter on.
This will turn the meter off without deleting any data.
You will briefl y see this display each time you turn the meter on.
See also
I can turn the meter off right now and take you home.
Insert test strip here to turn the meter on for testing.
If available then always prefer the metered and make sure they turn the meter on.
Turn the meter on or off Press and release.
Press the POWER button to turn the meter on or off.
Just turn the meter on, but do not drive.
Turn this switch to select a function or turn the meter OFF.
I turn the meter off, no trouble for money.
If I forget to turn the meter on.
Turn the meter off and wait for at least 2 minutes.
If you do not wish to perform a test at this point, turn the meter off.
Press to turn the meter off, or it will automatically turn off after three minutes.
When the measurement is completed, replace the photo detector cap and turn the meter off.
Note, Always turn the meter off before unplugging it to ensure no data is lost.
Look at this . You did not even turn the meter on.
To turn the meter off, press the SELECT button until the display goes blank.
Press the SELECT button for approximately 2 seconds to turn the meter on.
Turn the meter on by pressing the On / Off button.
Turn on the meter Press the On / Off button to turn the meter on.
Turn the meter on and let's go.
Holding the Meter over your other hand, turn the Meter over.
Turn the meter off, remove the test strip and re-insert it.
Press the left ( ) button to turn the meter on and enter memory mode.
Turn the meter on by pressing the “ M ” button to check the time and date.
Enter the set-up mode Turn the meter on.
Meter Reset, Turn the meter off and back on again to re-establish communication 8.
Press and hold the “ Memory ” button for 3 seconds to turn the meter on.
You didn't even turn the meter on. Look at this.
While the meter is turned off, press the “ M ” button to turn the meter on.
If I forget to turn the meter on. -I understand.
Press and release ( power / set button ) to turn the meter on.
Just turn the meter on, but do not drive . ( Cell phone rings ) Andrew Recorded.
Look after my stuff, and turn the meter off, yeah?
Just wait a minute, all right? Look at this. You didn't even turn the meter on.
Something wrong, lady? Just turn the meter on, but don't drive.
