Examples of 'turn the speed' in a sentence
Meaning of "turn the speed"
turn the speed - This phrase is commonly used in the context of controlling or adjusting the speed of a vehicle or machinery by turning a knob, dial, or lever
How to use "turn the speed" in a sentence
Basic
Advanced
turn the speed
Turn the speed controller up by turning it to the right.
This button is used to turn the speed function on and off.
Now turn the speed control to the desired driving speed.
In order to stop the appliance turn the speed control knob to position.
Turn the speed and impact control dial to the maximum torque.
If you can not pull out the rod, turn the speed adjusting.
Turn the speed control to the speed you would like to use.
When removing the sample, turn off the power or turn the speed to zero.
Turn the speed control down and adjust your speed to the conditions.
Pour the egg white/cream into the mixing beaker and turn the speed.
Please turn the speed dial to minimum value for your initial practice.
In order to make the device stop, you turn the speed control to OFF.
Turn the Speed dial clockwise and release it to slightly increase the reading speed.
The speed will increase when you turn the speed switch from Min. to Max.
Turn the speed selector to P until the bowl or jar is clean.
See also
After you have completed blending, turn the Speed Selector off to position.
Turn the speed controller 2 in an anticlockwise direction to reduce the speed.
When finished processing the ingredients, PLEASE turn the speed control knob to the OFF position.
Turn the speed controller 2 in a clockwise direction to increase the speed.
When you have finished processing, turn the speed selector to 0.
To switch on, turn the speed switch to the desired setting.
Now, this might sound insane, but you are going to turn the speed up to 10.
Turn the speed control knob counterclockwise to increase blower speed - clockwise to decrease speed.
For increasing the speed setting, turn the speed controller ( 2 ) to the desired setting.
Turn the speed knob clockwise to increase speed and counter-clockwise to decrease speed.
The steaming process begins when you turn the speed to a low speed setting - 6.
Then, turn the speed adjustment knob to adjust the blade operating speed as desired.
For example, - When you turn the speed control.
Turn the speed selector control slowly to the right / left to select the operation speed.
To switch OFF the unit turn the Speed know to " 0.
Turn the speed control fully to the left ( lowest speed ) before driving down a slope.
At the end of processing turn the speed control to the OFF ‘ O'position.
Turn the speed controller forward to increase the motor speed and blowing / suction air speed.
After kneading / stirring turn the speed knob back to the “ 0 ” position as.
Turn the speed adjusting dial clockwise for higher speed, and counterclockwise for lower speed.
To switch off the appliance, turn the speed control switch to the ‘0'position.
Turn the speed selector to “ Stop ” to apply the brake and stop the platter rotation.
Dients being mixed, turn the speed control knob clockwise until the desired speed is reached.
Turn the speed control screw clockwise for higher speed, and counterclockwise for lower speed . Fig.
If equipped, turn the speed adjuster ( B ) to idle by turning it.
Turn the speed change knob to the position 1 or position 2.
After use, turn the speed selector to 0, and unplug the appliance.
Turn the speed preselector wheel 10 to the desired setting.
If equipped, turn the speed adjuster ( 4 ) to idle by turning it counter-clockwise.
Turn the speed change lever to the position 1 or position 2.
Once I turn the speed cannon on, But this is categorically a lot scarier.
Turn the speed button clockwise to the ‘ hare setting ' to drive quickly.
Turn the speed setting knob to position “ 2 ” and check that the machine does not start.
Turn the speed setting knob to position “ 2 ” and check that the machine has not started.
Turn the speed dial, shown in Figure 1, to select the desired speed.
You'll also be interested in:
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
