Examples of 'turning speed' in a sentence
Meaning of "turning speed"
Turning speed is a term used to describe the velocity at which an object or vehicle rotates or changes its direction. It refers to the rate at which a turning motion occurs and is often used in the context of vehicles, machinery, or sports. Turning speed can influence the stability, maneuverability, or performance of an object during rotational movements
How to use "turning speed" in a sentence
Basic
Advanced
turning speed
Turning speed reducer for the turntable of an excavator.
Stepless adjustment of the turning speed is possible by means of a potentiometer.
This stance is quite often used for its fast turning speed.
Required turning speed.
The turning speed of the fans can be adjusted using a speed control.
This is the predicted average turning speed for the turbine.
Optimal clod breaking under dry conditions due to its fast turning speed.
Avoid a rapid increase in the turning speed by quickly steering in the opposite direction.
Having a regulated maximum torque that is independent of the turning speed of the mechanism.
A drive side turning speed detecting portion detects a turning speed of the drive side.
Moving the axle forward will increase your turning speed and lighten the front end.
A turning speed suitable for the circumstances can also be selected from the bridge.
The speed change depends on the turning speed of the JOG wheel.
The turning speed determines the dim-down speed.
Hazard due to vibrations Every rotating device has a critical turning speed range.
See also
Typically, the turning speed is approximately two thirds of the spraying speed.
The forward / reverse speed depends on the turning speed of the wheel.
Could adjust the turning speed at any time to solve the problem of materials ' vibration.
The forward / reverse speed will depend on the turning speed of the wheel.
It returns the turning speed override % of the second spindle currently selected by PLC.
Especially in the case of wind-powered mills the turning speed can be irregular.
DNCSSO It returns the turning speed override % of the main spindle currently selected via DNC.
By adjusting the selector switch, you can work with a faster or slower turning speed.
Time to reach turning speed r1.
A rate-of-change detecting portion detects a time-dependent rate of change of the detected turning speed difference.
Time to reach turning speed r4 0 end of evasive action manoeuvre.
Gradually increase your speed by turning speed control knob forward Figure 17.
And turning speed to be complied with r1 r3.
DNCS, PLCS, PRGS, CSS, Returns the turning speed in revolutions per minute, selected by DNC.
When the turning speed r2 0 is reached, the time t2 shall be noted.
SDNCS, SPLCS, SPRGS, SCSS, Returns the turning speed in revolutions per minute, selected by DNC.
It returns the turning speed override ( % ) of the second spindle currently selected at the CNC.
Lastly, the vehicle 's turning speed and acceleration can be a let-down at times.
When the turning speed r2 0 is reached, the time t2 shall be recorded.
You'll also be interested in:
Examples of using Turning
Show more
Turning and turning in the widening gyre
This place is turning into a war zone
Turning your interactive whiteboard on and off
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
