Examples of 'two-fluid' in a sentence
Meaning of "two-fluid"
The term 'two-fluid' in English is used as an adjective to describe a system or device that involves the use of two different fluids or types of fluid
How to use "two-fluid" in a sentence
Basic
Advanced
two-fluid
Separator frame for a two-fluid exchanger device.
Two-fluid apparatus and method for recovering and regenerating refrigerant fluids.
This is referred to as a two-fluid nozzle with external mixing.
Atomisation of the dispersion was performed with a heatable two-fluid spray nozzle.
The case of the two-fluid isentropic flow is discussed.
They may also be used to transport two-fluid mixtures.
Incompressible two-fluid flows where surface tension plays an integral part in the.
In a further aspect of the present invention, the atomizer is a two-fluid mixing nozzle.
The use of a two-fluid nozzle has marked advantages over a wheel atomizer.
One additional design weakness of the two-fluid design was its complex plumbing.
The agglomeration fluid was water atomized by steam in a centrally positioned two-fluid nozzle.
Such a two-fluid mixing nozzle may be an internal mixing nozzle or an external mixing nozzle.
The atomisation stage was carried out using an two-fluid nozzle air atomiser.
In the present analysis, a two-fluid model for blood flow through a horizontal channel is studied.
In the process of the invention the waste is introduced by means of a two-fluid atomiser.
See also
The solution is sprayed using conventional two-fluid nozzles with air as the propellant.
The use of a two-fluid nozzle shows markedly better results than using a wheel atomizer.
A numerical analysis of vertical ascending annular flow with the 1d two-fluid model is performed.
For this reason, the conventional two-fluid nozzle requires great power to supply air.
Below the lambda line the liquid can be described by the so-called two-fluid model.
For example, spray means such as a two-fluid nozzle or a rotary atomizer can be used.
Liquid waste in fine droplet form is introduced into the gas stream vÃa a two-fluid atomiser.
The use of a two-fluid nozzle atomizer fitted in a standard spray congealing / chilling apparatus is particularly convenient.
The purpose of this thesis was to study neutronics of a two-fluid molten salt reactor.
This mixture was pumped to a two-fluid nozzle atomizer equipped on a Mobile Minor spray dryer.
In an example, the ejector member is a two-fluid nozzle.
Verification and validation of the modified two-fluid model and supercritical-pressure constitutive laws are presented.
Preferably, the atomizer unit is a two-fluid nozzle.
These observations led to the two-fluid systems described in conjunction with the drawing Figures.
In a further aspect, the atomizer is a two-fluid mixing nozzle.
With Hendrik Casimir he devised a two-fluid model to explain superconductivity with thermodynamics and Maxwell's equations.
It is preferable to use two-fluid nozzle.
Use of two-fluid nozzles.
The hydrocolloid solution was sprayed through a two-fluid nozzle as follows,.
A statistical two-fluid approach is used, leading to models similar to the Baer-Nunziato one.
Current theory explains this using the two-fluid model for helium II.
The nozzle may be a two-fluid nozzle, pressure nozzle, rotary disk nozzle and so on.
The multi-fluid nozzles can particularly be two-fluid nozzles.
The two-fluid design is mechanically more complicated compared to the "single fluid" reactor design.
If desired, a multiplicity of two-fluid atomisers is employed.
The alginate / protein solution is conveyed via a pump into a two-fluid nozzle.
Atomization techniques include, for example, two-fluid or pressure nozzles, or rotary atomizers.
The solids fraction was adjusted with water to 25 % and sprayed by means of a two-fluid nozzle.
Figure 2 shows schematically a cutout of a two-fluid heat exchanger according to the invention ;.
Examples of such sprayers include a rotary sprayer, a jet sprayer and two-fluid sprayer, etc.
Some examples of an atomizer unit include a two-fluid nozzle, a rotary atomizer, or a pressure nozzle.
Classic conservative Godunov-type schemes can be applied to the two-fluid model.
Examples of such a nozzle include a two-fluid nozzle, a pressure nozzle, and a rotary disc nozzle.
The multiphase model employed was the euler-granular two-fluid model tfm.
Pressure nozzles, rotary disks, two-fluid nozzles, and the like are used as the atomizing unit.
