Examples of 'typical thickness' in a sentence
Meaning of "typical thickness"
typical thickness: Describes the standard or usual thickness of something, providing a reference point or benchmark
How to use "typical thickness" in a sentence
Basic
Advanced
typical thickness
Typical thickness of a wall of a khrushchyovka building.
Let it be assumed that the oxide thickness is smaller than the typical thickness.
The profiles have a typical thickness of 3 mm.
The typical thickness of the titanium oxide coatings was around 8 µm.
This primary layer is deposited over a typical thickness of 10 um.
With the typical thickness of paint layers, a sufficiently strong magnetic signal is difficult to obtain.
The logos prepared had a typical thickness of about 30 mils.
A typical thickness of the platelets is for example 30 µm.
The main casing has a typical thickness of the order of 40 mm.
A typical thickness deposited in one go is 80 nm.
A layer 5 of magnetic material Al, formed by sendust with a typical thickness of 5 um for example ;.
A typical thickness d for the walls of the profile is roughly 1 - 2 mm.
This free layer 1 has a typical thickness of between 1 and 6 nanometers.
A typical thickness for the aluminum foil layer is about 8 or 9 microns.
The underlayer has at typical thickness between 1-5 microns.
See also
The typical thickness to width ratio of a plate structure is less than 0.1.
The underlayer may have a typical thickness between 1-5 microns.
The typical thickness of a lateral type of gain structure is of the order of 500 nm.
The intermediate layer 4 comprises, for example, a typical thickness of 2 microns.
The typical thickness of the central path of a dielectric stripline is between 30 um and 50 um.
Depending on the section of the river the bars had a typical thickness of 18 to 27 mm.
The typical thickness of a conductive slug thus formed is for example between 3 and 50 micrometers.
This dielectric layer has a typical thickness of approximately 10 to 13 nanometres.
A typical thickness of the peripheral wall 4 is about 10 mm.
A spacer layer separates the layers with a typical thickness between 30 and 60 µm.
The typical thickness of the electrode with Al current collector was 100µm.
In these, the free oscillating layer 1 has a typical thickness of between 2 and 50 nanometres.
Typical thickness of the composite will be lower than λ/20.
The membrane is approximately 65 % open área and has a typical thickness of about 20µm.
The typical thickness of the magnetic layer 2 is 23 microns.
An Ru antiferromagnetic coupling layer having a typical thickness between 0.5 and 1 nm ;.
The typical thickness of alloy to be deposited before oxidation is 0.15 nm to 2 nm.
According to Figure 1, a duvet with a filling of 100 % Polyester fibre may exhibit a typical thickness of 4 cm.
A typical thickness for the magnetic layer 2 is 22 microns.
The electrolyte 124, of a typical thickness of 2 um, is an electronic insulator with a high ionic conductivity.
A typical thickness is approximately 0.20 inches in the uncompressed configuration.
However, a typical thickness could be 4.5mm to ensure good location of lugs 7.
A typical thickness of the intumescent layer is between 0.5 and 2 mm.
The typical thickness of this encapsulation layer 7 is between 5 and 10 nm.
A typical thickness for the bearing layer is 250 micrometres.
A typical thickness of a silicon oxide cover can be, for example, 1.5 micrometers.
Typical thickness of the overburden varies from 5 to 15 metres, exceeding 20 metres in places.
The typical thickness of the tube is within the range of between 0.5 and 3 mm.
Typical thickness of such a plate is from about 5 microns to about 5000 microns.
A typical thickness for the composite polymer and UV-cured resin being 15 to 25 microns.
Typical thickness for these materials will be about 10µ to about 100µ as well.
A typical thickness of the layer of metal covering material ranges between 50 and 1000 microns.
A typical thickness for this carbon overcoat layer is in the range of about 150 to 350 angstroms.
A typical thickness of the backing sheet for the lamination process is between 200 and 750 µm.
You'll also be interested in:
Examples of using Typical
Show more
Typical entry arrangement to the forecastle accommodation
This is not your typical police station
Typical of a woman to make a remark like that
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
