Examples of 'ultimate tensile' in a sentence
Meaning of "ultimate tensile"
ultimate tensile: The ultimate tensile strength is the maximum amount of stress a material can withstand before breaking or failing
How to use "ultimate tensile" in a sentence
Basic
Advanced
ultimate tensile
Is the ultimate tensile strength of the stem.
Actual values for yield strength and ultimate tensile strength.
Ultimate tensile stress yield stress.
There is no loss in ultimate tensile strength.
The ultimate tensile strength undergoes smaller changes.
It is important not to load the device beyond its ultimate tensile strength.
Is the ultimate tensile strength.
The yam properties were selected to maximize the ultimate tensile strength of each direction.
Ultimate tensile stress.
The stress magnitude is lower than the ultimate tensile strength of the material.
The ultimate tensile strength of the connector material should be determined.
Such a structure takes a high risk of yielding a desired ultimate tensile strength of the steel wire.
Fu is the nominal ultimate tensile stress of the weaker part joined.
The space between two first parts corresponds to a second part with zero ultimate tensile strength.
This ultimate tensile strength is sometimes also referred to as tensile strength.
See also
Alternative terms used are Ultimate tensile strength or ultimate strength.
The ultimate tensile strength and yield strength of the profiled steel.
Ag is the maximal uniform strain related to the ultimate tensile stress Rm.
Ultimate tensile strength is the tensile stress at which the bolt fails.
Ag the maximum uniform strain related to the ultimate tensile stress Rm and.
The ultimate tensile strength was measures in the área of the proximal holes.
Table 6 shows the ultimate tensile strength data.
The ultimate tensile strength went through a maximum as the phenolic resin was decreased.
Figure 53 is a chart depicting the ultimate tensile strength of engineered tissues.
Ultimate tensile strength is the force needed to stretch a material until it breaks.
However, the improvements in tear and ultimate tensile are not shown to be balanced.
The ultimate tensile stress is increased considerably with respect to the initial characteristics.
In some cases, it will be desirable to effect significant reductions in ultimate tensile strength.
The ultimate tensile was calculated as the average measured on four different dog bones.
The stress at the point of complete breakage is called a material 's ultimate tensile strength.
The yield stress and ultimate tensile strength reached a maximum after four passes.
This alloy, however, exhibits the major disadvantage of a low ultimate tensile stress.
The ultimate tensile strength is reached when the sample breaks into two pieces.
Dry insert 14 also has a predetermined ultimate tensile strength to inhibit breakage during manufacture.
Ultimate tensile strength VOR.
Further, non-reinforced elastomer compositions tend to break at relatively low ultimate tensile strength.
The results for ultimate tensile strength reflected the yield strength results discussed above.
Typically, a generally inverse relationship is obtained between ultimate tensile strength and strain to failure.
Grade Rm Ultimate tensile strength MPa.
Additionally, the preheat temperature had an influence on the ultimate tensile strength and yield strength.
UTS ultimate tensile strength.
Kind of steel ( nominal values for yield strength and ultimate tensile strength ) form and size.
Rm / t designates the ultimate tensile strength at the calculation temperature.
Sinusoidal load controlled cycling was preformed to 60 % of mesh ultimate tensile strength.
Where? u is the ultimate tensile stress of the material.
Additionally, the d / l-a-tocopherol concentration had a significant impact on ultimate tensile elongation.
Also, the ultimate tensile strength of the fiber should be determined.
The tested wire samples had the following ultimate tensile strength as measured by ASTM E-8.
Conversion to ultimate tensile strength was accomplished mathematically, using established conversion tables.
The alloy has a tensile strength of greater than about an ultimate tensile strength of 140 ksi.
You'll also be interested in:
Examples of using Ultimate
Show more
The ultimate aim was to achieve universal suffrage
The pilot is the ultimate safety factor
The ultimate fusion of snow and humanity
Examples of using Tensile
Show more
Mechanical tensile test prehoistable navigation lights
The main advantages of the tensile test are
Tensile test on parent material of the bottom
