Examples of 'uniform load' in a sentence
Meaning of "uniform load"
uniform load: In engineering or construction, a uniform load refers to a distributed load that is consistent in magnitude and direction along a specified area or structure. It is used to calculate the resulting forces and stresses on the material
How to use "uniform load" in a sentence
Basic
Advanced
uniform load
The wind is considered by means of a w rate uniform load.
The razor has uniform load distribution across each blade unit.
Additionally, it is difficult to achieve tolerances desirable for uniform load distribution.
Machines with uniform load and no shocks Uniform loaded conveyors and elevators.
The initial condition of the coil was taken as a uniform load of 1 microgram.
Multiple rows of SRU Walers ensured uniform load distribution in both longitudinal and transverse directions.
A uniform load has a positive effect on the pressure-distributing properties of the seat.
Whatever it is, the snow load is considered a uniform load on the surface projection.
Solid circular flat plate, simple bending, simply supported, with linearly decreasing thickness, uniform load.
The compactor may apply a uniform load stress of 20 kPa.
Machines with uniform load and no shocks Mass acceleration factor < 0.2 Uniform loaded conveyors and elevators.
Shims, cut from rubber sheet for example, may be used to facilitate uniform load transfer.
Q-the equivalent uniform load on.
Curved beam in bending, end A supported and roll guided, end B fixed, uniform load.
Curved beam in bending, end A supported and slope guided, end B fixed, uniform load.
See also
Curved beam in bending, end A simply supported, end B supported and slope guided, uniform load.
Curved beam in bending, end A simply supported, end B supported and roll guided, uniform load.
Small deflections of triangular plates, equilateral, 3 supported sides, uniform load.
Small deflections of triangular plates, equilateral, 3 clamped sides, uniform load.
Beam, simple bending, with held ends, left end supported, right end supported, uniform load.
The combination of the longitudinal and transverse trusses 324 and 325 provides effective and uniform load distribution.
Curved beam in bending, end A fixed, end B fixed, uniform load.
You'll also be interested in:
Examples of using Uniform
Show more
Uniform dispersion in the whole listening area
This old school uniform needs a wash
Uniform provisions concerning the approval of vehicles
Examples of using Load
Show more
You can load up to five discs at once
Suppose you walk by with a load of cement
Lower the load to the bottom point
