Examples of 'unit is mounted' in a sentence
Meaning of "unit is mounted"
The phrase 'unit is mounted' usually refers to the act of installing or fixing a specific device or equipment in a stable position. It is commonly used in the context of machinery or appliances, where parts or components are attached securely to a surface or framework to ensure proper functioning
How to use "unit is mounted" in a sentence
Basic
Advanced
unit is mounted
Check that the unit is mounted solidly.
The unit is mounted in front of the telescope.
A data communications unit is mounted on carrier body.
The unit is mounted on wheels for maximum mobility.
Make sure that the unit is mounted in a level.
The unit is mounted generally vertically on one edge.
The roller bearing unit is mounted on the axle.
If the unit is mounted on a structure of insufficient strength it may fall.
The high capacity power unit is mounted in the tail section.
The unit is mounted in the corner of the opening to be monitored.
Make sure the unit is mounted properly.
Before connecting the brine piping Make sure the indoor unit is mounted.
The entire unit is mounted on a wood base.
Keeps the handset stable when the unit is mounted on a wall.
The switch unit is mounted on the dashboard of a vehicle.
See also
In one embodiment said electronic unit is mounted on said block rack.
The burner unit is mounted on the end of the heat exchanger.
In one embodiment said electronic unit is mounted on said module rack.
The engine unit is mounted to the frame vÃa a suspension link member.
A liquid ejection apparatus in which the liquid storage unit is mounted is disclosed.
Here the power unit is mounted in the garage.
G Handset Hook Keeps the handset stable when the unit is mounted on a wall.
The drum unit is mounted into the cartridge.
Replace the power supplies after the FileCruiser unit is mounted in your rack.
The control unit is mounted in a component.
Display inversion, display is readable when the unit is mounted upside down.
Make sure the unit is mounted within this limitation.
On an outer bottom surface of the dust collection bin, a lifting / lowering unit is mounted.
The signal receiving unit is mounted to the ceiling panel.
The unit is mounted as shown in figure 12 approximately central to the glazing panel.
Use this method only when the unit is mounted on a horizontal surface.
The light unit is mounted on the vehicle by performing the following stages.
In the on-board version the unit is mounted in a wall cabinet.
The entire unit is mounted on a base plate which incorporates the electrical panel.
Thus, the strip 2 is hidden from view when the glazing unit is mounted on a vehicle.
The ejection unit is mounted directly in the body of the socket.
Alternatively, the main channel where the control unit is mounted may thereby be reduced.
The scanning unit is mounted to the framework of the inkjet system.
Wherein, a protective cover for the ultrasonic irradiation unit is mounted on the ultrasonic sterilizer.
The rotating unit is mounted on the end flange of a driving shaft.
The attached bottom terminal block 6 of the interface unit is mounted under the terminal block 5.
The chassis unit is mounted rotatably on the cabin of the elevator car.
As an off-the-shelf solution, the wheel motor unit is mounted separately and with no axel.
The blade unit is mounted to the tool body using another screw.
Take care that the drive unit is mounted correctly to the pole.
The unit is mounted on the wall with 4 screws or bolts.
The automatic stroke control unit is mounted on top of the hydraulic cylinder.
The unit is mounted in a fixed position above the strip of glass 40.
A controlled differential steer unit is mounted between the two propulsion motors.
If the unit is mounted on an unstable structure, it may fall down causing injuries.
You'll also be interested in:
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
Examples of using Mounted
Show more
The VarioHeat must be mounted on a flat surface
Surface mounted luminaire for indoor applications
Rotary encoder with mounted stator coupling
