Examples of 'unit power' in a sentence
Meaning of "unit power"
Unit power refers to the amount of electrical power consumed or produced by a specific unit or device. It is a measure of the rate at which energy is transferred or converted within the unit, typically measured in watts (W) or kilowatts (kW). Unit power is commonly used in electrical engineering and the analysis of energy systems
How to use "unit power" in a sentence
Basic
Advanced
unit power
Turn off the unit power and.
Indoor unit power supply and communication cable.
To turn on or off the unit power.
Turns main unit power on and off.
Unit power requirements are located on the data plate.
The a posteriori unit power generating cost.
Unit power will be slightly lower in this case.
The a priori unit power generating cost.
There are two reasons to consider head unit power.
The total unit power generating cost.
Reducing main unit power.
Indoor unit power supplied from outdoor unit.
Insufficient control unit power supply.
Standard unit power supply via outdoor unit.
These arguments must have the same unit power.
See also
The mailbox unit power is off.
Unit power is automatically disconnected when unsafe conditions are detected.
This switches the unit power between off and on.
The power mode may be an appliance unit power mode.
Outdoor unit power was not turned on.
This makes them cheaper per unit power as well.
The outdoor unit power supply patterns vary on models.
Which possess unit power.
Turn the unit power off before removing filters.
The resulting constellation will thus average to unit power.
When turning the unit power on for the first.
Unit power off.
The power mode may be a control unit power mode.
Cycling unit power will also clear the fault.
Inertial measurement unit power.
The unit power is larger.
If you need to supply power to more than one unit power.
Indoor unit power supplied from outdoor unit initial setting.
Captain unit power.
Unit power input.
Connection of the indoor unit power supply and communication cable.
These changes will be stored and retained on unit power off.
The package includes a charger unit power a screwdriver and instructions.
The unit power should be off when you install and replace batteries.
Luminous efficacy is the light output per unit power input.
Plug the scan unit power cord into a properly grounded electrical outlet.
Propulsion unit power.
Indoor unit power supplied from outdoor unit when shipped from factory.
Inspect all extension cords and the unit power connection periodically.
Lit when the unit power is off but when the timer setting is activated.
The number of striplines are dictated by the smallest unit power divider or combiner.
Insert the resistance unit power cable into the resistance unit as shown.
Connect the power cord supplied with the unit power input terminal.
Lights when the unit power is off but when the timer setting is activated.
This operation must be performed with the unit power supply switched off.
You'll also be interested in:
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
