Examples of 'unit will return' in a sentence
Meaning of "unit will return"
unit will return: Indicates that a specific group or entity will come back or be restored to a previous state
How to use "unit will return" in a sentence
Basic
Advanced
unit will return
The unit will return to standby mode.
The display will glow and the unit will return to the set temperature.
Unit will return to standby mode display.
After a power outage the unit will return to a disabled state.
The unit will return to the normal play mode.
When you turn the unit back on the unit will return to normal status.
Then the unit will return to normal operation.
Any previous settings will be cancelled and the unit will return to its initial settings.
The unit will return to normal operation when conditions permit.
Any previous settings will be canceled and the unit will return to its initial settings.
The unit will return to normal operation when the voltage returns to normal.
The security function will be canceled and the main unit will return to normal operation.
Otherwise the unit will return to the default greeting.
The alarm setting is now complete and the unit will return to the last mode.
The unit will return to operation mode under normal conditions after a few minutes.
See also
The channel will begin playing and the unit will return to the Preset Mode.
The unit will return to this cue point by shortly pressing the button CUE.
If this item is selected, the unit will return to original setting.
The unit will return into Sabbath Mode after a power failure.
Operation mode is working, the unit will return to the prior operation.
Then, the unit will return to stop status at the beginning of the next track.
If the icing problem clears up, the unit will return to normal operation.
Unit will return to normal recording mode if vehicle moves continuously for 3 seconds or longer.
State, and the unit will return to normal mode.
If no button is pressed within 5 seconds during setting, the unit will return to standby.
Thus, the unit will return to previous mode.
Seconds after starting or selecting the lullaby, the parent unit will return to monitor mode.
If not, the slave unit will return to the channel scan.
The unit will return to the normal mode 5 seconds after pressing the button.
By actuation of any button, the unit will return to the previous operating mode.
The unit will return to its previous setting after a 30-second boot sequence.
When the operation finishes, the unit will return to the prior operation.
The unit will return to its previous setting after a 30-second delay for booting sequence.
When the compressor cycles back on, the unit will return to the original fan setting.
Otherwise, the unit will return to the condition prior to Step 2.
When the channel search is complete, the unit will return to the Setup Menu.
After Auto program is complete, the unit will return to Manual program mode.
By disconnecting the cable from TOURING L, the unit will return to the previously selected mode.
After 10 seconds without any operation, the unit will return to the previous mode.
Press “ HOLD ” key again to unlock reading and the unit will return to “ Measure Mode ”.
You'll also be interested in:
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
Examples of using Will
Show more
I will have no time with you alone
This transport will take you there
You will be there for six weeks
Examples of using Return
Show more
Press BACk to return to the previous menu
Return the unit to its upright position
I have gotta return some video tapes
