Examples of 'upper handle' in a sentence
Meaning of "upper handle"
This phrase is used to refer to the top part or handle of an object or tool, typically something that can be held or lifted from the upper part
How to use "upper handle" in a sentence
Basic
Advanced
upper handle
Use to secure upper handle to lower handle.
Handle knobs for assembling upper handle.
Slide upper handle down onto unit.
Hold control bar against upper handle.
Place upper handle onto lower handle.
From the outside of the upper handle.
Against the upper handle to propel mower.
Hold blade control against upper handle.
Rotating the upper handle centered of the angle.
Repeat on other side of upper handle.
Raise upper handle to the operating position and.
Place nut into recess in back of upper handle.
Secure the upper handle and lower handle by.
Release bag clamp from the upper handle.
Align upper handle with the lower handle.
See also
Slip starter rope into loop on upper handle.
Open the upper handle locks.
The clutch control lever is located on the upper handle.
Unfold the upper handle towards the back.
Tighten star knobs to secure upper handle to lower.
Pivot the upper handle into operating position.
The recoil starter is attached to the right upper handle.
Hold upper handle firmly and pull starter handle.
Pull up and back on the upper handle to raise the.
The upper handle has two holes each on both.
Screws to secure the upper handle to the lower handle.
Remove any packaging material from the upper handle.
Install the upper handle so that the direction of the.
Tighten the knobs that secure the upper handle.
Ensure the upper handle is located correctly with the.
Hold brake yoke down to upper handle and slowly.
Raise upper handle to the operating position and tight en.
Tighten hand knobs securing upper handle to lower handle.
Hold the upper handle so it curves away from the cleaner.
An upper liquid reservoir is provided in the upper handle section.
Reassemble upper handle and all parts removed from.
Insert clip on tool caddy into hole on back of upper handle.
Rotate the upper handle into its operating position.
Stand behind the tiller and grasp the upper handle.
Assemble the upper handle using the handle nut on.
The bail switch is located on the upper handle of the mower.
Raise the upper handle and align the screw holes in.
Loosen the clamping nut and pivot the upper handle.
Hold upper handle fi rmly and pull starter handle quickly.
Align the screw holes of upper handle and lower handle.
Fit the upper handle using the accompanying bolt set.
Gently lift and pivot the upper handle into the.
Grab the upper handle and pull the switch lever.
The blade control is attached to the upper handle of the mower.
Unfold the upper handle until it aligns with lower handle.
